If its a V8, I may be interested in your old parts... I hope to go the other way, auto to stick. Must not have been many manual tranny...
1.21 jiggawatts!!
Headers? What size? What size exhaust? Full length or dumps? Should be somewhere around 8.5:1 compression ratio, assuming good intake and...
Its kinda like solder... My dad and everyone I've dealt with locally calls it "sawder", and can't spell it, can't pronounce it, but can buy it and...
I don't think the lift and duration are quite the same, but its not a big difference. 351W timing is a bit different due to the longer stroke, at...
Generally, I call them "dammit!" cuz I bumped into one and got my shirt/pants/whatever a nice grease spot.
the Mustang conversion crossmember is a good start. The link to Mustangsandmore was what I referenced when I did my swap. Most of the info in that...
With a 302, eaders will pass the bellhousing just fine, looks like 6901s would be a perfect fit. Hooker super comps are really close to the pan, I...
You misunderstood. I was logged in, but I could not reply to anything. Generally, just go back one page and click the link again fixed it for me....
Wasn't fixed during production, but this way you could prevent going into OD and busting the input shaft, it would likely shift early into third....
Ditto, computer nerd here, been using Firefox since v0.94. Occasionally it won't let me type in the message box, but that seems to be fixed with...
The old AOD can manually shift 1, drive, Overdrive. There isn't a reliable method of making it hold out second gear. They can run without shifting...
It finally moved under its own power, I sat on 3 oak boards for a seat and drove it out of the shop to pull into the other bay and put it on the...
definately! I've never seen them on a Mav or Comet... lol
heh, I'm gonna laugh if Tom posts a link to an old magazine on his desk... lol http://tomsdesk/1972FordTimes/pg37/index.html
Yea, automatic undercoating. :)
Mine was the same as Frank's. Mine blew it out of the dipstick tube and vent on the valve cover. Didn't do it unless it saw over 4000rpms. One of...
definately interesting there dirt racer. I'll try to do some comparison before we swap the Fairlane to discs. It probably needs tie rod ends anyway.
heh, I can't say that I've ever looked. I don't remember one on mine. The tags are reflective, if its that dark, by law, shouldn't the cop have...
Just looked it up myself as well, Chiltons says the same. The Grabber I pulled them from was a 73, maybe it had been swapped previously. It was a...
Separate names with a comma.
