Hello, want to pull my 302 without the C-4. I removed the four nuts holding the torque converter to the flex plate. I could not push it back far...
Hello, need a little help, My engine looks like I'm driving with the valve covers off. It is blowing oil out the dip stick tube, around the PCV...
Hello, thanks for the info everybody. I put a dial back timing light on it. WOW at 2000 RPM I have 55 deg total. Something is wrong with my...
Hello, I have run 3 tanks of gas. The pining is still there. 1. I just notice I have a lot of blow-by at idle 2. My oil pressure has been 15 psi...
Hello, my oil pressure range is 15(190-200 temp at idle)-60 psi, temp is between 180- 200. I have a 180 t in it. .I run the tank as low as I can,...
Hello, thanks for the info. My normal gap with the Pertronix Ignite II has been .44. I will check the PVC tomorrow. Thanks Tony
Hello, out of the blue my 302 has started to ping. I have had the same set-up and tune for 4 years with no problem. I went to work on Thursday and...
Thanks for the info. I would like to set my Mav up pretty close to yours. Later Tony
How is your rear suspension set up Tony
Hello, could you give us more detail about your Mav? Thanks Tony
Thanks for all the info. The roller tips from CAT are for rail rockers with non-adjustable. I'm trying to see if there 2 different lengths. 1 for...
Hello, I have 72 MAV with a 302. What size push rod length do I need? I’m using the rail rockers (CAT roller tip) Right now I cannot get any...
Hello, dose the Professional Products balancer have 3 key way, one for each timing mark? Thanks Tony
I had dual exhaust installed today. What a difference. 2 1/4 going to Dynomax super turbo muffler with a H-pipe. They dump right behind the rear...
72 Grabber I have one 72 grabber total 1940 Tony:drive:
:drive:Hello, my friend has a ford 9 inch housing out of a 66 mustang. So were going to use the pumpkin out of the Van, the axles and brakes out...
Full size. Engine and trans gone. Tony
Hello, I will be installing a 1968 9 inch with 3.25 gears out of a 1968 Van. Will I be able to use my 1972 u-joints or will I need a special...
ratrod:Hi, I put team strips on the left fenders. Tony::
:HandshakeHello, just called Ron and he give me the dimmer switch P/N SD-02 and the connecter I will need. Just called summit they will be here...
Separate names with a comma.
