Any 289 or 302 will bolt in with factory parts. For that matter, a 260 and the oddball 255 will too, but the 260 has a 5 bolt bellhousing like...
That's the very reason I keep a used 6 cyl one in my trunk at all times. If mine were to break in Resume Speed, Wherever, I could change it out...
Looks like you will beat Frank this time! :D Hope it turns out like you want!
Buddy of mine had a VW sand rail that somebody stole the engine off of outta his yard. 4 bolts, 2 wires, and the throttle cable, yanked it off...
And it's gone again.......Clay ran into some financial problems, so the Maverick has been sold again. Bummer. Maybe he can get it back again...
Is that factory approved? :rofl2::rofl2:
Bell size depends on the tranny. Do you have a case fill {dipstick goes into top of case} or pan fill {dipstick goes into side of pan}? Case...
I always use alcohol to flush a system out...
X2 :2thumbs:
That sounds about what I was thinking they were worth. Doesn't matter to me if it's a street rodder or Maverick person as long as they have they...
5 lug Maverick/Comet rear, 2:79 ratio open rear. Pulled from a 74 Comet. What's it worth? I want a ballpark figure, not "I'll give you ???? for...
I know some AOD and big bell C4's share a common flexplate and torque converter bolt pattern. My 85 engine had an AOD behind it, I used a big...
440 six pack!:2thumbs: or HEMI!!!!!:2thumbs:
Use PB Blaster. It will free it up and keep it free...
Yeah, you need to come over to Jasper, every first Sat starting in April. Good cruise in, usually have 75-100 cars. In front of the JC Penny's...
I told you that you'd like the Lincoln! :2thumbs: I love mine! Much better than the chinese flux core I had that was stolen.:thumbs2:
:Welcome: from AL! That car looks a lot like mine did when I first got it! Good luck!
All Frank's projects are strange because their Frank's project. :D Strange because Frank doesn't think like we do, he thinks like Frank does.:D...
Good work! :thumbs2:
Rebleed the drivers side again. It's possible there is still a bit of air in the line not letting that side have full pressure. There also may...
Separate names with a comma.
