Here they are notice that its not lifted any just a slight rake from the tires.
Check out www.summitracing.com for the gears they have a wide selection of ratios for a 8". Russ
Corbin Here's my theory on need vr's want. I NEED to be happy... The things I WANT make me happy. So... NEED = WANT It's just simple math. :) Russ
Well... the car is lowered due to wornout leaf springs, but I do have a set of coil"helper" springs on the car, that clamp to the top of the axle...
THEY FIT !!! 275/60/15 !!! They are close but on the drive home NO RUBBING. There's about 3/4" in between the front of the tire and the wheelwell...
Welcome to the board. You have a good looking car to start with. You're right, there is lots of good info on the board, and If you have any...
Todd I was thinking about tieing them to the front of my truck then driving really fast twards the rear quarter of the Mav. then slamming on the...
Well after a tranny rebuild, new valve springs, new edlebrock alum water pump, new valve covers, and air cleaner, I'm back on the road. Best part...
Great that's the answer I was looking for. Now all I have to do is go buy the 71 and get to swapping :) Thanks again. Russ
Try this:: http://www.usbodysource.com/
Here's one place: http://www.usbodysource.com/ I don't know about the quality, but I think Wilber Green has one. Wilber you out there???
I didn't know how long I would be away from a computer, so I asked Wes to post that question for me. Thanks Wes. I'm looking at a 71 Mav with 4...
Only problem is the charcoal canister has gone bye bye's. How about I just put a plug in it?
So I need a breather/cap with a hose nipple to connect to the air cleaner? What do I use for hose? (heater hose?)Thanks for the help guys.
I got a new "Ford Motorsports "air cleaner. On the bottom is a plastic fitting for a hose conection. Uhh what does it hook to? If I don't hook it...
I gap mine at .055 I figure the newer ing. has enough juice to jump the larger gap. I don't know if it's right or not,but It's been working for...
Thats funny Doug I drove my Mav home from FT Worth in 1990. Maybe they breed well in that Texas sun.:)
Well it is an aftermarket cam It's been so long since I bought it I can't remember the specs on it. I think it is a Blue Racer Wolverine cam.It is...
I pull a valve cover off today and found two of the valve springs screwed up (I think) It looks like one of the inner springs (the flat wound one)...
Maverick Stallions didn't come with the "Stallion" wheel. It was available only on the Mustangs. Why doesn't someone e-mail the seller and ask for...
Separate names with a comma.
