do you have an electric fuel pump?
I got one delivered today from MAS. It looks like a well built fiberglass piece. The installation is with screws. The spoiler seems to match the...
Update I got the nut off. Had to get a 1 5/16" socket and used the impact wrench. Then I used the puller and as soon as I couldn't turn it any...
I put a new seal and need to tighten up the Pitman Arm nut. What kind of Torque does it require? It is a 1972 302 with PS. I know it was a son of...
DO I need to take the new pistons to a shop to install on the arms? Do they come out easy or need a press or punch? Lemme know. Thanks in advance.
Dave the Start Shifter came with switches. So I am good there. You say both are on the colum. Inside the car? Near the firewall?
I am in the middle of putting in a B&M Star Shifter. I have to relocate the Nuetral Saftey Switch and the Back-up light switch to the new shifter....
I got a nasty 90W oil leak in my steering gear box. It is ooozing out right above the Pitman Arm. I got a new seal from NPD. It is 1 1/8 inch for...
[IMG] Are you using this part to convert? My manifold and cylinder and pump are shot. Thats why I am doing this. I looked into rack and pinion....
Im currently converting from PS to MS. The stuff came out easy. Just waiting on my last part to come UPS to complete it. I know whatever I do, I...
Do you think I am crazy for this repair method? I started this thread. This is what I ended up doing. I have one fender that is great. One fender...
Jb Weld Would JB WELD fillin in the holes I have without a lot of trouble? Would the durability be better than fiberglass? Would it be close to...
JC Whitney 20% off Use code AEBBCX8. Great source for leaf springs that fit
Dave I was never arrested before but almost was in London Ontario like 26 years ago. I was coaching a basketball team and the players were a...
These brazing rods sound simple. If not I may take Dave up on his offer.
Awesome- I thought it had bolts like in the fender. Havent looked above the rear wheels-are they tabs or bolts?
Brazing rods? Do I just need the rods and MAPP gas? Anything else?
Gents- A few fiberglass strips seems so much easier? WOuld you do that?
Craig I want to fill the holes though. Can i do it from the outside?
I got my fender out and tried to melt some pre-fluxed rod that the welding shop says will melt at 500 degrees. Using MAPP gas it is just turning...
Separate names with a comma.
