For 5.5 months I have been re-building my Maverick and you guys have been a great help. Below is a pitcture of where I am at. I need to get plugs...
Thanks for your advice. I found Coastal assembly lube. The assembly is going great. Got cam shaft in, crankshaft, pistons, timing chain. I may...
This guy sells them for Mustangs and Mavericks. He will make sure you get the right one. Good prices, fast shipment. I am very happy....
I am in the middle of engine assembly. I am using an electric fuel pump. How do you block off where the old fuel pump went in the frint cover?...
I have the cannister of edelbrock lube for the cam and crank. But STP is good on the rest of it?
After 5+ months of restoration. The motor assembly is slated to begin Saturday. Anywho, the parts stores here dont sell "assembly lube" per se. A...
Fellas I wrote about this a few weeks ago. I had a sive in my gear box from the pitman shaft seal. I went to NPD and got one for a Stang that...
I am putting in my rebuilt motor this weekend, I have my eye on a low end NOS boost from edelbrock with 50-75-100hp nozzles. If I only use this at...
Should I install my 3.55 posi after a 1000 miles or so. Or should I put it in with the new rebuild?
This is what I have done. I attached the fuel pump to the frame next to the gas tank. I grounded it. I ran the positive to a newly installed fuse...
Where the fuel line comes into the compartment at the side of the shock tower I plan on attaching a few inches of rubber fuel line to the electric...
I got that book, my chiltons which is great for torque specs. and other specifications. I also took about 100 digital pictures of the motor as I...
Basically I plan to build the engine and install its components in the reverse of how it tore down starting tomorrow. Any tips, like common...
Thinking about doing side pipes. Anyone have pics of them on a maverick? :beerchug: :angry:
I was on my creeper making some preps for the engine install this weekend and was thinking how to route the pipes from the headers. The Maverick...
I bought a grant wheel with the Ford aluminum horn. It is 13", 1" smaller than the stock one on a 72. I love it
Still leaking. I got a 72 Mustang seal which was nothing more than a rubber washer. I found this part. Is that the one you are talking about? I...
Jeff I took your advice. So far so good. Thanks
I used 90W based on what Chilton's Manual said. I am willing to try anything. What is your schematic from the bottom up? Like I said I have a nut,...
I have a 72 with a PS steering gear box. It had been leaking for years. I got the pitman arm off and saw there was no steering gear shaft seal....
Separate names with a comma.
