Yes sir! I definitely had 6 cyl linkage.....the v8 stuff would be the way to go if you dont have headers...or have good headers designed to work...
copy and paste C4 column shift linkage + longtubes into the search box and a thread with my pics and another pic without power brakes (a...
Welcome to the forum! Mine was a 6cyl swap that was unfinished, but it came with headers and the column shift linkage I had gave me so much grief...
Give equal banging to each tab! lol[ATTACH]
Already happened to mine before I got it. I have a bumper, waiting to collect a hood, grille, and stone guard.....but not holding my breath.
My 74 had the extra metal below the UCA. I used stock style Moog UCA. That plate had to be ground for clearance, and the sides of it needed to be...
Lol...yes, but once the engine goes that fast, everything downstream from there has to take it too.... expense and work. I am happy to go slower...
I didnt pull the trigger on the 351. I decided to get what was in the car when I bought it to run as good as I could, and then contemplate an...
The second summer was very fruitful in the building process. A 3" mandrel bent single exhaust was fabbed off the headers, Taurus fan with volvo...
I bought a T-bird spoiler at P&P that is the right width, but is shaped like a boomerang. I need to straighten it out and make the ends come down...
When I got my car, I was not keen on the light blue, but two years later it is growing on me. Your car is nice looking, and very fast.....great...
If you can find a rusty, 76-77 big bumper 302 maverick for parts, It will have v8 swap parts, 5 lug, disc brakes, and 8"rear end, and a non-roller...
I think Fords vision for the Maverick was purely a competitively priced transportation car, and nothing more than that. The fact that the car...
I took my distributor apart. It had a 13 and an 18 slot. I moved it to the 13 and soldered a piece of brass in the upper end of the 13 slot to...
If the primary stop screw (Holley 1850) is turned in more than 1 turn from primaries fully closed, too much transfer slot may be exposed adding...
Took my distributor out, took it apart, and soldered a piece of brass into it to limit the centrifugal advance to 12 degrees. Put it back in and...
BTW, I took the bypass valve out of my pump, and it had one washer/shim that was .025 thick. I made a fat shim out of a washer, and my total is...
This was an interesting read from the land of Mopar. http://www.moparts.org/Tech/MoparAction/PumpItDown.pdf Pictures of pressure relief valve...
I need to take it to a shop to get "real" numbers, but I have done a Shelby drop by moving the UCA holes down 1" ( in a line pependicular to what...
I finally got to drive about twenty miles at highway speed, and I think that Saginaw pump is making my steering to sensitive too. It was that way...
Separate names with a comma.
