I found a NOS horn button when I restored my Sport Wheel. [ATTACH]
I didn't have to cut mine when I swapped my C4 to a t5 in my '74.
The pushrod on my '74 with drum brake was 6 7/16" long. [ATTACH]
Sounds like you don't have the shoes adjusted close enough to the drums. With tire off the ground...how hard it it to turn? When you give it a...
Why not find a 7/8" sway bar from a Maverick or use the early Mustang sway bar if the 7/8" is too small. I'm no engineer but I feel the Granada...
Whats up with the Scotchlok on the wiring harness? Those thing should be against the law. Tell me that those are not household wire nuts in the...
You might need some plastic....
If it was me I'd get the correct balancer. You might run into belt alignment problem and timing mark location.
I got a few more things I want to do to my nineteen sixty three and a half Ford Falcon Futura Hardtop Sports Coupe first. That reminds me...How's...
Here are a few changes I seen. 70-74 have the 24" hole spacing...76-77 have 20". The regulator support on the 70-74 is close to the rear corner of...
This was my winter project. Last October what set out to be a quick repaint on the valve cover, ended up being a total rebuild of the engine....
Early package tray on left...plastic tray on right. [IMG]
Also come tinted and non-tinted. Some have the regulator riveted to the door instead of bolts making it hard to remove the glass without drilling...
[ATTACH] [ATTACH]
I found a set in the junkyard...took different cars to get a good set
Here's a pic in 2nd gear. [IMG]
Here's a pic of my Maverick w/t5 and bench seat. I'm tall so the seat it all the way back [ATTACH]
I usually grab 2 butter knifes from the kitchen drawer
Back in the early 90's I was kicking the idea around of replacing my t-10 for a t5. Guy at the transmission shop showed me the gears in a t5...
I'm thinking the 3.03 would weigh more than a t5 since it's cast iron. Here is how I did the t5 swap on my 250 Six...which has the same...
Separate names with a comma.
