I'd shave the head .050-.075 for more compression (per falcon performance manual) or you will be in the same low compression boat that you're in...
I bought from McVeigh for my 60 and 63 Falcon.
Loosen the straps so you can wiggle the tank while pulling on the neck. Sometimes they can be a bear to remove. WD40 helps some
74 only part. http://1bad6t.com/Maverick/repair/seatbelt_74.html
Went and got a half tank fresh gas to go with last years half tank and took the long way home
The plastic bucket bearings are different and size of hole in fender for bucket to fit into is different also. [IMG] [IMG]
You will need an inch longer strap bolt. Best I can remember the next size longer was 3 inches longer and had to be cut to length. [IMG]
Headlight bucket changed in '75 [IMG]
As you state the whole lifter and bore itself needs to be lube well when installed...its basic engine building 101. But we are talking about...
If the rocker arm shaft wasn't installed slow and even to allow the oil to bleed out of the lifter then it will bend the pushrod or bend the...
'60-'62 small six's have solid lifters. Ford went to hydraulic lifters in '63. Ford used up the adjustable rocker arms bin on hydraulic cams then...
What exactly do you need to know? [IMG]
What ever you do...don't cut the whole floor pan out or you take a chance of the car folding in the middle. With a uni-body it is best to replace...
If so, see post #15
You can order online or over the phone.
I heard the Mustang quadrant will hit the cowl when used in a Maverick. This is another reason I stayed with the Maverick clutch linkage.
That is how I did it almost. I used a step-bit after drilling a pilot hole instead of hole saw. [ATTACH]
Best paint job I ever seen was painted in the guys backyard. I'm not talking about a shop in his backyard. I talking about a blue tarp laying on...
I agree on better shocks, replace worn parts and alignment if no already done. Most 6 cyl springs have more spring rate than V8 springs. Engine...
The center is plastic. I cleaned the spokes with a Dremel attachment that looks like a brown scrub pad. [IMG]
Separate names with a comma.
