If any of you read my Thread on my Trans install being put on hold. You would know that the person that installed the 4 speed O/D tranny that was...
well hopefully I will be getting my new bellhousing before thjis weekend and can get this new trans installed. I just emailed the person about the...
I mean basically this guy came up with a way to use a T-5 bellhousing with the stock clutch fork configuration. So if this had been done a little...
Well My new tranny isn't going in this weekend. The first SNAFU is the new tranny was out of a 390 mustang and has had the 302 input shaft...
they both look great
I don't know that anyone makes a unit Specifically for a Maverick other than the old ones from back in the 70's but there are definetly under the...
It's a good thing (for you)we don't have many females on this forum :rl:
Why would it matter? Is it one of those 4 speed trannies that has a Granny low or something? I mean as long as it is a good transmission and you...
Bellhousing is aluminum. Thanks for the info. I will probably go with the 10.5 upgrade now that I am pretty sure it will fit. The reason I am...
OK That is what was bouncing around in my head but then there was that little goofy guy in the back corner of my brain that was trying to tlel me...
99% sure it is a stock flywheel for the 1973, 302 and the bell housing is whatever bellhousing mates a stock 73, 302 to a 4 speed toaploader, and...
what is a Track Rental???
I have a 1973, 302 in my 73 grabber and am hooking up a 4 speed toploader with the 1-1/16 input spline, what size clutch do I need to buy so I can...
#1 I did look it up and the numbers that are being used such as 5 10 20 30 40 50 are all arbitrary number that SAE Made up in the first place......
Not really very accurate Another way of looking at multi-vis oils is to think of a 20W-50 as a 20 weight oil that will not thin more than a 50...
I've been running synthetic in my 200 I6 and it doesn't leak or burn oil, no more than 1 quart between changes at around 5,000 miles. I think it...
if you arre talking about for a grabber hood, there are several sets on Ebay right now
I don't think a grabber scoop would require a stamping machine. [IMG]
you can get a lot better explaination on a Stall converter/Torque converter here...
Stall converter is the part that goes inside the bell housing on an Automatic tranmission that is filled with fluid and fins allows the car to...
Separate names with a comma.
