Where should I check that?
I'll have to check on that Barry. The primary resistance is recommended at .6ohm, and that is the coil I was using. The car started cutting out...
Good idea! I'll give it a test and see. The gauge says 14v, but gauges can be wrong. Time for the multimeter.:)
Hi Jamie, good to hear from you. I had a Blaster ll coil with my Mallory distributor last year, killed two of the coils and finally ate the module...
Lower mount isn't the problem, just get the '72 plates. It is the upper mounts that are the problem.
I have a 69.5, and you can't do it without serious surgery. You have to change the shock mount pan to get it right. I use slapper bars, and they...
Jim; I am going to use a potted coil this time, and see if it will live. I also am going to contact MSD and Pertronix and see if they can help....
Looks like I missed out on a good time. Glad Chris got to go, and I wish I could have seen everyone. Next time, for sure!
All the stock wiring has been replaced with a Ron Francis Express kit, so the resistance wire is long since gone. According to Pertronix, their...
Welcome, from W. Georgia!
Hi folks, I have a question on ignition that I hope someone can answer. I am using a Pertronix Ignitor ll distributor, and I have just blown...
Good stuff! Hope he appreciates it!
I'll be there Russ, and I am picking up Chris in Ringgold along the way. We will meet you at the Cracker Barrell!
I have an 86 5.0L, and I use a B303 cam and stock rockers and push rods. I'm afraid to go any bigger on the lift (.480), and the duration is 224....
Cool.....see you there! BTW, Cracker Barrell is good!
Gonna be sweet!
Where in Ga. is Varnell?
Not real sure I can make it yet, but anything you decide will be fine. Hope to see you on Sat!
Separate names with a comma.
