Again, looks like you guys are only installing one on one side. I guess if one didn't hold it up, it wouldn't be difficult to add on to the...
I have a set of used gas struts in the trunk of my car waiting to be installed, but from the looks of these guys, you are only needing one on one...
You have 27 so should have passed up that requirement by now. Are you logged in? If so, do you see the DELETE button on the bottom left side of...
Any muffler shop could cut out your existing muffler, and will have glasspacks in stock (or be able to get them within a day), and can stab one...
Yes, you are right. So there are two springs. And that cable spring is pretty stout.
Yes, just the stock spring that is on the carb. Wouldn't be too difficult to add another spring. I got it working now, just had to move the cam...
Just the spring that is on the carb. The cam is either brown or maroon. It is the most aggressive one in the kit, with only one hole. Looks...
OK, figured it out. Not sure why it all of a sudden became an issue, as I have been driving this as it was for the past 6 months. The cam on the...
Cool!!! So now he has heard it at least twice!
Secondary accel pump seems to be the issue. Feels fine when I manually activate it, but when it is on the carb, the plates stick open. The...
Sounds good to me! Ed doesn't come on here anymore, so I will let him know.
Just took it apart. With the bowls off (or with primary bowl on and secondary off) it works fine, nice and smooth. Accel pump on secondary seems...
It is interesting that nowadays, immediately after these kinds of surgery, they want you up and rehabilitating. No laying around for 6 weeks while...
Don't remember. I don't think so. I think I just blew out the passages and sprayed cleaner in the body. I dunked the bowls and metering blocks...
This thing is freshly rebuilt, and tuned to RUN, but today, I stomped the pedal to prime it before starting it, and the throttle is binding as it...
What's wrong with the 3.80? I drive mine on the highway and yes, 3000-3200 rpms, but I still pull mpgs in the low (very low) 20s. Like exactly 20!...
GPS Speedo for speed. Clinometer for pinion angle. aDyno for 0-60, 1/8, and 1/4 ETs and speeds (still a little buggy, but cool when it works.)...
In case you guys didn't notice...it is a piece of junk. I don't see a straight panel on it, and with that paint missing off the top and windows...
Did it not pump up? Or did the spring fail?
Meh! 1/4"...it will go away as the engine warms up. :dead: Check the lifter and cam lobes.
Separate names with a comma.
