I bought some roller tips on ebay with the following add. When I recieved them several of the roller tips were frozen. Would the following add...
maxpower, I agree, but go one step further, stroke the 351 to 393 or 427!! Over 400 cubes in an a stock engine compartment!
I think Tom is correct, my only question is do the pistons actually go all the way to the top? ie-zero deck clearance. The only way to calculate...
Compression Ratio COMPRESSION RATIO = (swept volume + total chamber volume) total chamber volume It is important that we understand...
I will be using the stock maverick hood, not butchering the grabber hoods!
merc1, can you post a picture? and TH, is that a picture of the AK scoop or the original GT hood scoop?
yes, I'm using the open chamber heads (2V). If I go to the SRPs I would go with the standard windsor head! Though, I have an old article stating...
I meant the bottom of the pin area. I didn't want to start investing in stroker parts but I guess the worst that can happen is I would have to...
here is the other pic
mavman, these pistons have a ch of 1.602. If I use a newer 9.503 block the pistons will be .020 in the hole. This actually works in my favor as...
so, if I'm around 500 lift I may not need to clearance the rods? Nice pictures! Did you have the whole assembly balanced using SFI balancers and...
Not the greatest picture but it does show the brackets and the spacer between the alternator and the block
100hp increase when changing to headers? Are you sure? Headers are usually good for 10% or so! Did they put manifolds on a 700hp engine and...
mavman, the 302 pistons hitting the counter weight is something I would not have thought of! I know different aftermarket pistons have slightly...
old guy, that's what i was thinking. Get a stroker crank and find the stock pistons with 351 rods and there you are! of course it would need to...
maybe it was 351W rods and 302 pistons? I can't remember!
1350 isn't nearly as bad as I figured. Makes it tempting!
mavaholic So the real question is, you gonna do it? If I can ask, what will they charge to ship?
merc1mack, and anyone else, does the AK hood scoop bolt on? Did they provide a template to assist with installation? Thanks
Does anyone have any info about stroking the 351W using stock 302 rods and stock 302 pistons? Does anyone have the formula to determine the...
Separate names with a comma.
