The gt40 only came on the Lightning trucks and the Cobra Mustang. The gt 40p came on the explorer. 1985 was the first year of the roller, although...
If the fluid is and stays clean you probaly wont have any problems, That is not excessive milage but it is excessive time. The seal that is rotted...
I would either go with the B&M or the transgo, If you get the B&M get the Transpak. If you go with the transgo get the reprogram kit. Either of...
AHHHH, must be nice to have warm weather year round
It seems alot of people dont understand how the C4 works. I build alot of C4s and have covered about every angle of the inner workings of the box....
Currie will sell you a 9 inch housing and axle package built to maverick specks. Rite down to the orignal location of the brake line holders. The...
The Maverick steering is almost the same as the 65-66. A complete rebuild will work Wonders. P.S.T. Has a good rebuild kit that is reasonable priced.
The aod can be a great street and strip trans if built and assembled rite. I have built them for street and strip Mustangs with very good results....
Maybe this will help with the agurement,
Use the manuel it will give you measurement of good and bad parts, In most autos you will know if the parts are good or bad just by looking. The...
OK, now if we can just convince the Outlaw 10.5 guys of what you're saying, they will break records and be going even faster......:rofl2: :coco:...
It dont matter if you have 18 inch wide slicks if your car is overpowering them then they wont give good results either. Im just saying that if...
Im not going to tell you to use it, Because auto transmissions can be funny anmials. But i will yell you that i rebuild a lot of transmissions (...
That is the reason for the 60 foot improvment is the stiff sidewall, No wasted enegry wrapping up the sidewall. I have pulled 1.5 g"s with the...
The only tire i have not used is the M&H racemaster. I have used nitto, BFG, All brands of M/T, I have used wrinkle walls, I have used all the...
This is the space with a 275-60-15. I just want to try this upload to see if the resize is rite, ps 4 inch bs, rolled lips
If you can pull the valve cover the hi-po had screw in studs, If you can pull the oil pan there will be a counterweight behind the balancer next...
I use the fel-pros from autozone for a 88 mustang 5.0. They have never given me any problem. Sorry dont remember the part #
The 289 special was a HI-PO 289, IT had screw in rocker studs, closed chamber heads. Factory 4 barrell intake, Better flowing ex. manifolds. High...
Has anyone Had any dealing with a Neil Chance or Precision industries torque converter? Im in the market for a good converter and any info would...
Separate names with a comma.
