scooper, did mine a while ago but want to say it was 25 ft lbs
great picture hawko, thanks. I had seen the post you linked. I was hoping to do it without the welding. Need to find a big tree! Merlin, are you...
Hawko, any idea how much he "pushed" the bumper in? Thanks for the pic! If I pushed them in 2 inches it doesn't appear as though I would need to...
Before I proceed with this I would like to run it by everyone to see if I'm missing anything. First, if anyone has pics they can post of a car...
Ward F this is Ward J! what are you running for pistons with the aussie heads?Also, the intakes you referred to were made by BA ??? They were...
So the boss 302 head isn't a 4V quench chambered cleveland head with modified water passages? Can you bolt a boss 302 head onto a cleveland motor...
scooper, found the thread. I noticed in that thread that someone indicated that the windsor juniors have the same problem. It this true?
doesn't the 69 351W have a shorter deck height? may be important when thinking about stroker motors.
thanks streetrod, just wanted to be sure!
Scotty, you're right. He indicated above he was talking about the old style lifters. Maverickboy, if you get a chance take a look at a roller...
streetrod, you generated a lot of repsonses! That's good! As stated the boss 302 had very large runner cleveland closed chamber heads. To make a...
my answer was only in reference to roller cams and roller lifters. In the case of flat tappet never reuse lifters on a new flat tappet cam. I...
if it is a new cam then new lifters would be a good idea but not totally necessary. If it is a used cam then use the lifters you have! if you...
The Gt 40 heads have the exhaust ports in the stock location, correct? Therefore we can use most headers for this application. The GT40P have...
mavaholic, I think you can cut the stone guard down when converting from 74 to 73. It may be more difficult if going from 74 to 72. The 73...
dm, I've got the valance but it looks like this idea isn't very popular!
what are your thoughts on converting a 74 front bumper to a 73 while leaving the 74 rear bumper in place? I have already painted the car and...
it is the A9P. I'll look into the lightening "stuff". Is the A9L the 5spd ECM and the A9P the automatic?
stockhatch, thanks for the info. I'm currently running a 91 automatic ECM but I was able to buy the cobra ecm, MAF, cam, lifters, timing chain...
the maf is calibrated to the 24lb injectors. The MAF, injectors, and ECM are from the 93 cobra. According to the site I would need about 26lb...
Separate names with a comma.
