I'm needing some 302 headers, I see Summit makes some, but it doesn't seem like they fit. I don't want to pay a bunch, I need cheap...Or used!!!...
I copied these years ago, made a rear crossmember, put in a cage, mini-tubbed, 28x10.5, lowered a few inches......
What is the latest floor pan replacement ideas? I know some have used Mustang pans, 64-73 are all the same? And do you use the full length, or...
Where is the best place, and cost to get a complete kit? AutoKrafters is one option.
I may go, the track is running Jr's only next Saturday, so it may be an option.
Here's another tip, use a cut-off wheel instead of a torch. I used a 3" grinder with a cut-off wheel attached. Nice straight lines, clean, and...
Hey bob, I've been hanging out on fordsix for years too, so much good info. I drive the Maverick as an everyday driver, so I really don't want to...
Hey what's up? That was a nice job on that car, got room for my old Grabber? Yep, the same old red one I've had for 23 years now, needs...
I think Clifford offered a kit a long time ago, but like it's stated, they are a lot longer, making it a radiator problem.
HeHe, if it breaks around Arlington, I'll help....Man that's a nice car, didn't I see it on dfwstangs board?
OK, if you are serious about a six, go to www.fordsix.com plenty of turbo, nitrous, and just good build-ups.
Jetting it down will only make it run lean....don't do that. You can run one if you have it, and wire the secondaries shut, and it will be a big...
I have a plate system for the stock 1bbl carb, 60hp system. Went from 11.20's to 9.90's in the 1/8, stock 200. Not a big deal, I sent NOS a carb...
Just don't spend more than you could buy a set of aftermarket heads for! New valves/seats, and other services really add up. My Nephew spent...
The car usually is on a string going down, that's the first time I've seen him lose it. First time trial he went 4.26, the blower cars were in the...
Both are nitrous cars, left lane can almost hang with the blower cars, runs low 4.20's....
Separate names with a comma.
