Here is one, great guy to deal with as well http://item.mobileweb.ebay.com/viewitem?itemId=370706816166&kw=370706816166
The factory piece is known to cracked around the heads of the bolts that secure the ring gear. The clutch and steel plates are under that part of...
Very nice!
Check out this thread for the latest availablity http://mmb.maverick.to/showthread.php?t=81678&page=16
Keep in mind that the drum is typically rotating when you apply the brakes. Once the shoe is pressed against the drum the shoe assembly wants to...
when I had mine I used 2 velocity stacks. Had to remove the back stack to open the hood. To avoid that I would have had to cut almost all the way...
Another note on the Weiand is the top half is the same as a small block Chevy. When I got mine it had a single 4 top and I purchased the dual top...
Mike I had carbs mounted sideways on my Weiand for a while but they were way to big. When I had the money, I swapped them to inline mounted 600's...
I ran a tunnel ram on the street with hi compression 289 for years. You should use 390 - 450 cfm carbs for best results on the street. Still have...
Yes, Granada disc brakes are a direct swap. You may need to swap outer tie rods due to a different taper. Doubt the booster will fit. As far as...
If you’re going to buy a cover to use outdoors, skip over the cheap eBay covers. Here is what the one I bought looked like after 8 months of use.
National Parts Depot lists 3 grades of door handles for the 67-68 Mustang that will fit our cars. Imported Repro US Repro Better Chrome US Repro...
I used a Dremel to clearance mine.
Do a search on here regarding Showcars, they don't have a good reputation.
When I had the toploader in my car, I ran Blackjack headers and they hit the Lakewood Bellhousing in the starter motor area as Bryant indicated....
Congrats Earl!
The one in the video looks way to weak for my trust. I could see the whole thing tipping over while trying to move it. At a glance I am not sure I...
I saw that as well. They were at the Mid American Shelby event inTulsa. It belonged to a girl her dad built it for her and it has Windsor power.
On the dead battery issue, I always thought of having a device that holds a 9 volt battery with a couple of contacts to mate to amother set of...
Separate names with a comma.
