I hope so too! Have a safe trip.
I am running a MSD 6AL with a Ford Duraspark II distributor. Runs great. To be honest, the Durapark box probably did just as good, though I had...
I'm going to say that either you are superman, or your pump is not cutting it. You are sure it is the pressure hose?
For A/C you are supposed to use a 30 amp fuse because of the extra load. Without A/C the fuse is 15 amps. I really can't see how the clutch...
I believe it is an idler arm bushing for the early style idler arm. A little hard to remember the size but it looks like the one I pressed into...
Glad to see Patches is back on the road and ready to go! :thumbsup:
Wrong answer! :whip: :smash: :D Frank I know how fast you work, you'll git-r-done. Want to see all of the changes you made since last year.
I knew there had to be two different sizes.. are you sure the larger ones aren't for the tray? I tried setting a lower dash in place with the...
My I-6 driveshaft is not quite as long as my V-8 driveshaft, but I don't recall it being that much shorter. Measure the trannies like Frank is...
That missing relay had me thinking my car was a fake with a swapped VIN for a while. Once I figured out the wiring under the dash, I knew it was...
Here's your vacuum cannister: DORMAN 47076, about $9 at rockauto.com. I never have time to go to the salvage yard, and this was just as cheap as...
Not. My wiring goes directly from the switch to the lights via the factory wiring harness. No detours to the kick panel. 71 Grabber. That...
A sharp hole saw will knock them out in mere seconds! :)
Unfortunately, Danny Miller's funny car is not going to be there. I didn't include it originally because I was not comfortable that we had a firm...
+1 My big rear bumper saved my 77 back in 93 or 94. The bumper shocks did their job.
Yep, replaced mine with 3/8 aluminum. As you said, it's easy to bend and install, and no rust inside! :D
You won't get power to anything until you re-install the fuse box. That's grand-central station for power in your car. Hope you disconnected the...
Mine is a 16 (I believe) and there is no room to bolt a toolbox to the front of it. You'll also have more room for playing with placement on an 18'.
Been looking for a better quality replacement myself. This is a Comp vacuum cannister: http://www.jegs.com/i/Comp+Cams/249/5200/10002/-1
You will need the defrost 'tube' that connects to the dash. It connects differently to the plenum than the non-AC version does. I thought they...
Separate names with a comma.
