Don, don't have the spare MSD. Maverick1970 I tried that with the three wires leading to the distributor. Let me add more details. I wasn't...
Earl, fuel pump is OK. I think I'll focus on the MSD and wire connections!
Ok, we did a head change on a roller Fcam motor with RPM airgap and 600cfm bg carb. Long tube headers. Before the change the car ran fine. Now,...
Thanks Craig, I think I will trim the reducer to fit 2.5" pipes and tack on a short piece as well. I'll run the O2 sensors in the "fat" part of...
I'm happy with the headers as they are well built. Very thick flanges and actually easier to bolt to the head then cast iron manifolds. And, I...
signal20 good point. I considered running it in limp mode to get in on the trailer. I would prefer to get it running and "worked out" a bit...
Craig, did you use the reducers at all? Mavowar, I was only going to rig something up for initial startup. I will set it up to be removed so the...
floor pans The new autokrafters catalog has floor pans for mavericks. I don't see the new catalog online yet. www.autokrafters.com
I realize the shop will need to attach the headpipes to the reducers. I'm trying to setup a short home made exhaust system for initial start up....
For those that have a set of these does your passenger side reducer fit? Mine doesn't line up with the collector due to floor pan interference....
thanks mavmark. As much as I would like to stick with the boxed upper so the braces would fit I think it will kill the bottom end too much!
Mavaholic, interesting proposition! I agree the GM TPI is a better design with regard to working on the engine!!
411, good point about the weight issue and lower intake. Also, on the street a little less low end torque means less wheel spin from a stop...
Alright, let's hear your opinion. As you know when installing Ford EEC IV EFI systems in our mavs there really isn't much room. The upper...
those are the correct adjusters for the 74! I bought a set from them. Thanks
Well, the HELP section at the local parts store has the 75 and up adjusters. They do not have the 74 style adjusters. I found those on ebay. As...
Craig, was I supposed to be looking at the exhaust? Very clean car. Ratio, I considered the 3" single as well. I had a 95 TA and it sounded pretty...
I figured the 40 series flow master would sound good. just not sure about the other cross flow. I don't want something that sounds "ratty" when...
As we all know the mavericks have an offset gas tank making dual exhaust a little more difficult. In addition, I have the high pressure EFI fuel...
thanks 69 1/2, nice little trick with the high temp alum paint. I don't think it is down to the metal. Maybe the paint trick will help...
Separate names with a comma.
