alt That 60 amp Alt puts that at out at about 2000 rpms, not a idle. you're probably only getting about 1/2 your fans speed at idle.
alt Just what is the the Alt rated at? It's stamnped on one of the bracket mounts. If it's only a 40 get at least a 60. If you can find a 100 alt...
rearend axle bearings, seals = $55 appx. carrier kit =$100 appx, new gears=$155 appx, posi unit=$350-400, labor=$200 appx. Call Currie and see...
rebuild it We have the technology and we can rebuild it better. Rearend you have now, fits, keep it. Get a 8" Auburn posi unit with 3.55 gears....
BBF Mav Do it or change your sign on name. Just kidding. Try Global West, 877-870-2975 or www.globalwest.net or Fat Man Fabrications,...
scoop Scoop is the same as the Cougar Elimator used. I got one from a junkyard of a 72 Comet GT 0yrs ago. $10. Part number is a 69 part number....
bad vibs check the u joints, you may have hurt one. If not that, pull the valve covers off and check all the valve train. Rocker arms, retainers,...
scoop easy the hood seals around the air cleaner housing and forces the air to be routed thru the air filter.
solid they work great just don't go to big on the profile.
Life I look at it this way, "Life is to short to Drive a Chevy". Yeah Baby.
grounded gee seems like that was mentioned in a post earlier. They ain't no good if you don't read them.
trans ??? check the part numbers at a Ford dealership. They may be the same. Question ansewered. If not the same numbers, have them pull them off...
rod You must have the rod to make the Mod work. If your modulater isn't adjustable you can grind the linkage rod down about .060" at a time to...
Cleveland Easy ID is look at the block where the distributer goes. If it's only about 1/2" from the dist hole to the block edge where the...
testing 101 easy, use the "kiss" method. Take the cable that runs to the starter off the solenoid and put it to the battery side, with starter...
chrome Trans dapt makes them. Or if you can find a chrome shop and have them do your's. Powder coating looks good to.
lock her up 700HP, not a problem, gee NASCAR runs them and does have a problem. Axles are the problem, go bigger, connect Mark williams and...
point is???? so if you trust him, them a BBF in a Torino shouldn't be a problem.
rod bolts 5/16 rod bolts are a disaster looking for a place to happen. They're weak and useage in anything going over 5000 rpms. Why do you think...
do it I say do it too. With the front end kit and alum manifold, and mabye heads you'll loose from 30-100#s. People talk about this engine...
Separate names with a comma.
