Having fun now As for a 302, yes it is. It has 289 HiPo rods, not 302 rods, due to the comp height on the pistons, the heads are not Clevelands...
last resort One last way, just not what I prefer. Go down to the zoo and get the biggest, ugliest gorilla. Bring it home and have the gorilla...
One on Ebay right now bidding is at $3050 and climbing. 69 and looks correct. Only thing is until you pull it apart ??????
First start on ebay, Boss 302s were put in Stangs and Cougars, both Ram air and non ram air. Only difference is the air cleaner itself. Unlike the...
steering wheel "Kirk to Enterprise, beam me up Scotty. No intelligent life present". Have you read a thing I wrote down? Or just pissed at the...
to 4 or not to 4, that is the question 4 bbl will in most cases give you better mileage, if you can keep your foot out of it. Yeah right. Ford...
carbs This is my opinion, so keep that in mind. First off the Carter is best used in Marine application with a rope on the end of it. Edlebrock,...
spline Ford made no 31 spline 8" rearends. You probably need to rotate the axles has to install them. They are a tight fit, just play with it and...
steering wheel The metal piece will either pop off or have screws on the dash side of the wheel itself. Removing the rag joint won't do any good,...
lock her up It's easy. Remove the steering wheel. Then the two plastic covers around the steering column. Inside the column you'll see a worm...
flexplates Different, C-6 & C-4 use different bolt pattern. Also starters are probably diff to.
$$$$ As for the $857, that is a very good price with gears, bearings, posi and labor.
rearend Well I bought a 9" Currie rearend from them back in Dec. 89 and then toured their shop several years ago. Very impressed with their...
coil It's old, just replace it. They break down after a while when hot a loose power. Coils are oil cooled and they're just cheaper to replace....
to 4 or not to 4, that is the question If I might say, this is a good first car. Now it's also a old car that has been both babied and neglected...
Heads Two ways, I think ARP makes 1/2-7/16" stud kits for the heads or have them drilled out to 1/2" holes.
trans ??? You might want to get a pressure reading first. Could be a worn valve body bleeding off pressure.
point is If I haven't seen it or done it then it ain't so. I made a alum adapter I made that fits a 351W manifold on a 351W block with 2V...
Gee you can't use roller cams in Boss 302's? Didn't know that. And a racing block that has screw in core plugs, wow I'm shocked a racing part has...
If you can't find one you can make a "Street Boss" The question is how much money you want to spend? 4bbl heads are not way to go. Ports are to...
Separate names with a comma.
