Thanks for the comment. I have used a product from NAPA called Rust stop...Workes very well and is thin so it wicks into tight seams and pinch...
Unknown condition..."Runs" does it run well? does it smoke/ make noise??? Rear main seal leaks...Time for main bearings. Plus what it takes to...
Congrats Scott!!! and welcome to the "pic in a mag" club
http://www.jasperengines.com/index.php
Ford traction lock diffs are "locked" untill you turn a corner....Then they unlock... Most "Posi's" are like this with the exception of GMs' gov...
I plan to be there with the Sprint...Other one wont be ready in time.
If you plan on hitting the rear tires with some real torque...I would replace it. You have created a place for stress to concentrate itself and...
Wheel balance is off... Or a warped rotor...
Definitly keep the glass, the trim and the little clips that hold it all on. If you have the space...Keep the doors, fenders, hood and deck lid....
Put the small bumpers on the 76...You have all the parts you need to do it (Thats the hard part)...Part out the 71...You can probably make more $$...
Pickled the Sprint for the winter...Just waiting for spring/summer now.
Mock it up in the car and measure...Only way to be certain...And you wont have to do it twice...
Float not adjusted properly...Or needle stuck on seat not allowing fuel into the float bowl...
If fuel is getting to the carb but not into the carb (Sounds like it) Your needl/seat is stuck shut and or the float is not adjusted properly, and...
[ATTACH] [ATTACH] Heres a few more...14X7s'
The trim is worth between 100.00 and 200.00 dollars in perfect condition.
If you have a non air con' car, you can remove the driverside vent assembly and reach up in the hole. Pulling the dash will not help you clear the...
Cool concept Glenn but...IMHO...It makes the side profile look too tall and makes the car look stubby from front to back. I feel your pain with...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] Todays episode: More engine comp repairs. Had to make a...
Only once if they have a good diagnostic guy. Problem is, it will take time to find the issue, perhaps days and time is money for the...
Separate names with a comma.