The time and colorful expletives used will be greatly reduced if you just buy new complete upper cont' arms. Get new strut rod bushings as well...
Have the end caps copper plated...Then you can lead em in and never worry about cracks or separation...
Like em but...Where are the holes for the mounting clips that fasten em to the doors??? Under the vinyl covering thats wrapped over the back and...
Check battery state of charge...Dead battery wont crank nuthin Check condition of battery cables and connections for rust/corrosion(Green...
Oh...I was gonna say "Use the force" Never mind...o_O
Very actually...Tool steel for the dies...Big giant press to stamp steel between the dies to make the panel. Lets not even get into the whole...
Get rid of the nylon washer...Replace with aluminum or copper...Those nylon washers do nothing but leak till you reef em down...Dont want to do...
Have them true up the deck...Do a pressure test...Check all the valves/guides and seats...Definitely have them put new valve stem seals in it...
Did the exhaust smell like maple syrup...If it did...Yeah coolant getting into the combustion chamber. Look for a clean pair of pistons, look for...
GM Used those for the A/C lines at the compressor...Soo any parts store or GM dealer... Frank will no doubt tell you where/how much/ PN#...
Let us see a pic of the gasket surface of the head...You should have done a compression test before pulling the head. That would have told you...
They are welded in place (Like a stud gun does) You can grind em off or...Really simple, and fast...Put a pair of vise grips on the head...Lock em...
What larry said... Hence the term "Idiot" light
If you are building this to give it to your kid...The stock 302 with a proper tune will be plenty for him to get in trouble with. Put a set of...
OK... I commented...
It will fit...I would run the 4 door just to embarrass them all. Nothing like getting your butt handed to you by a 4 door, let alone a maverick 4...
Better to trim the towers in the 2 door. Unless you enjoy cutting spotwelds and such to change em out...
Loose timing chain...Check your plugs too...Could have a bad one or a miss gapped one. My $$ is on a loose chain though. Not unusual for the...
:drool::drool::drool::drool::drool::drool::drool: :bowdown:
Love the color Glenn, Awsome DOI too...Wish I had a place to paint mine...LOL... Just wish I still had a place to paint. Its going to be stunning...
Separate names with a comma.
