Exactly what is the purpose of the bypass? Warm water to the heater core faster?
77 Maverick with aluminum edelbrock water pump. There are two "nipples" on the passgenger side of the water pump. The upper nipple hose goes to...
Thanks Baddad, I think the serpentine pulley is from an 88-91 CV. It' for a friends car but still frustrating that Edelbrock indicates it is a...
Anyone using the edelbrock 8843 aluminum water pump? It appears to have a longer snout than the stock iron 77 water pump. We need to find a...
Franktf, thanks for the info. would I gain much room going with the smaller bell?
I know I can purchase flex plates with dual bolt patterns for the converters. Not sure about the spacer plate. The bolt pattern would be the same...
Thanks JS, one more question, can large and small bellhousings be switched on any C4? Need to know if I can go with a small bellhousing on the...
Need a reminder, two versions of the small block flexplate 156 and 164 tooth. I have a large bell housing C4 truck transmission with the 164...
Olerodder and CometGT thanks for the help. It makes sense that the control arm brace was boxed after trimming. Just wanted to be sure before...
CometGT, I realize we could trim the lower control arm brackets but you would be removing the "end of the box" which in my estimation would...
OK, I read through the archives and I want to be sure I have this correct. The Canton 15-610 - 302 oil pan will NOT fit the maverick without...
Thanks All, rthomas, nice to hear that you have seen it go in three times without problems. The kit is 2595, power or manual! And, car-nut, you...
I've read all of the archives regarding the RC MII susepsions and would like to simply confirm with those that have done it. Is it TRULY a...
Ok, problem solved. We found a water pump pulley from an 88 5.0L town car. We have a crank pulley for 86-93 mustangs. And, the water pump is...
baddad457, these would have the grooves in the pulley for the serpentine belt, correct?
OK, we have a 77 maverick with a 5.0 and standard rotation water pump. We are installing a PSC1 blower and we need to find a water pump pulley...
Thanks for all of the input. I would be purchasing it from an individual so there really is no way to guarantee the block even if it is in...
An odd question!! I have the opportunity to purchase a 351W roller motor with 12K miles on it. It was originally in an E250. The owner had a...
Thanks for the response
I know the 351W is wider and taller, but not longer. It uses a different oil pan, intake and distributor. But, I can't recall if it requires a...
Separate names with a comma.
