Yepp, I have them on mine to the cooler and the radiator. I think someone on here has a little story about tranny lines! Oh Rick, care to comment..
I run 4 7/8" bs on mine with small spacer. The rim is 8.8 with 275-60 DR on them. I did roll the inner lip and no rubbing. I also disagree (IMO)...
I ran the 7.5 with the first transplant. I had no money to upgrade and the car was a 2 barrel with a rv cam. Lasted a few months of my attempts at...
I run an 8" with a powertrax unit, 4.11's, 3000 stall, funny gas and sticky tires, no problems.
Reading the post again, it was not a question about using used lifters. It was a question about using hyd NON ROLLER lifters on a roller cam. Used...
I am not convinced he has roller lifters..
Please read the question.. Do NOT use HYD lifters on a new roller HYD cam unless the lifters are also roller. I agree with answer #2
WOW! Look when this thread started...
There is a thread that mentioned these and rather than highjack it I thought I would ask a few ?s here. I am running straight 2 1/2 from the...
I have the heddman coated. Love em. Easy to clean, look good (IMO) etc..
A hour? Am I doing something wrong? Even with the old heads (large plug) it was a 30 min job. Now wih the Edelbrocks (5/8 plug) I can opull them...
I see you have the oil pressure line that came with the gauge (plastic). I am sure you plan to change it to braided, if not please do! I fried an...
Nope, said springs
No caps, brand new heads. I set them last noight and it runs fine. After the comment from FredH I am at a loss as to how I lost that much in lash....
Hmm, why would my lash be off soo much? After 500 miles it was way off on 2 cylinders. Nuts and stops were tight. The springs were the only thing...
I assume that chart is if everything is working perfect, including traction and optimum gears etc.. It is based on how much horsepower it takes to...
? Engine was/is balanced. Just for fun, I pulled a plug wire off, ran up to 3500 rpm and there was a shudder.
We don't always get to hear the outcome of some ?'s on the board so I thought I would let you know what I found. The lash was getting pretty loose...
Sorry, I don't have one and it is now in the car. I guess I could pull it out for a quick pic! NOT! I just splayed the arms out to the lower bell...
A picture is worth...
Separate names with a comma.
