Yes....I think you are right. I forgot about that one.
These are some pictures from my tech article on here about upgrading to power disc brakes. [ATTACH] [ATTACH] [ATTACH] [ATTACH]
If the wire has "dashes" instead of a line, it is part of the seat belt system
Send me an email (see below) if I can help.
I agree....your center link will not have any "wear". In rebuilding the steering parts (ie, slave cylinder, control valve) I suggest you rebuild...
The V-8 belly bar is not "required", but I would recommend using one. Get disc brakes from www.DiscBrakeSwap.com. You will need spindles,...
I replied to your other thread.
I have found that the original colors in these carts, no matter what the color, has different "shades" of the color. I think your best bet would...
It is either the cable....or the controls...that is the issue. One can remove the speedometer and will be able to see both and see what the issue is.
I have one just over the border in Indiana if you just want to buy one and replace it.
That is the bulb that goes to the fiber optic wire that goes to illuminate your wiper switch bezel. Should be a socket on the end of that fiber...
What cross member? Which end of the cable are you trying to remove?
There is a "pin" you have to pull out. I find it easiest to open the driver's door, then sit outside the car on the ground and this will give you...
Yes I have the parts. You also need the little "flapper" that goes in the grooves and holds the e-brake whn you have pulled it out. Twist the...
Have you had the controls out of the dash during all your work?
I think Marti Auto Works can get you the correct sticker and metal tags. www.MartiAuto.com
I sent my center vent in and had it replated. The company that did it is now out of business. But, it goes to show you how NICE they look when...
To answer your question....brake effect would be GREATLY increased with the booster not hooked up. I think it would not even be driveable....
The factory dryer is located right next to the condenser behind the grill on the driver's side.
Looks like somebody has added those brackets to an aftermarket hose. Does not look factory.
Separate names with a comma.
