Stuff like this is very subjective. So basically you just have to weigh the added cost vs gain from each design. From there you'll need to have...
It can happen both ways, either carb float sticking and dumping excess fuel till the point of exhaust system saturation and ignition.. or...
Looks right but also looks as though the throttle cable bracket is skewed at an angle which could cause the binding you describe. Also looks like...
Glad to hear it! Does your trans have the adjustable modulator? If so then it's just a matter of fine tuning the part throttle shift...
Did you see the link and tech support number I posted for you above? Short of one of us actually doing it, I'm not sure what else we can do for...
I'd say 1/2" is pretty safe as a general rule but just too many variables to really nail a specific number down. Fatter old school 60 or 70...
Thanks much for your time to follow up, Craig. Thought maybe I could cut up a pair to make them work on my early GT/Grabber style bezels but...
As mentioned.. always go straight to the horses mouth to help avoid the other end while needlessly ordering parts that may or may not even work....
Right on Tom. We've drilled and ground off the staked ends and retacked them a few times.. but far easier to just find the complete shaft and...
Edelbrocks are completely different than the holleys.
Ok thanks. The guy selling them on this forum seems to have disappeared for further questioning on the matter. So any idea if the later '75...
Looks like part #1483 but I have to wonder if all the eddy carbs take that same linkage? Might be a good time to call the manufacturer directly...
Common problem and most of eddy stuff is made for later model cable operated stuff like the aod and such. The parts you're likely ordering will...
Some excellent stop leaks on the market that would be a short term fix for that. Also good old sodium silicate(liquid glass) to fix very large...
No Chip.. not the clear ones, I'm aware of those, but that later 74-75 versions that were white with small square light refracters molded onto...
Thanks much Craig. I will PM you if he gets back with me today so you don't waste any of your time.
And don't know why i didnt think of it earlier.. mav man has early bezels and later lenses so should be easy enough to look and see if some light...
My concern is that the original lenses are dimpled around the bezels screw holes and not sure the 75's listed in the classifieds here have that...
Yes. The ones on my 71 GT. Want to go from the amber to white with small squares.
Ok.. thanks again. Thought about cutting and making my own but tough to find material that looks oem. The bigger issue is that I want to make...
Separate names with a comma.
