Saw one of those on a mid-60's Falcon at a car show a few years ago.
Since you're not running high compression, boost or nitrous I wouldn't bother with the MSD box.
Or , if you have the room and don't need a butt connection or need to connect several wires, the Posi-Twist are little less expensive:...
Not personally, I always solder and heat shrink my connections, but I know a lot of the stereo installation shops are using them because they save...
And if you don't want to crimp or solder the extension wires:...
:Welcome: from a 70 owner in south central PA.
I just soldered extension wires onto the fuse clips and ran them to a new fuse block that I mounted on the package tray to the left of the...
Do you know when in 1970 your car was built?
My '70 was different evidently. There are no provisions in the floor pan for buckets. Mine was built in June 1970.
Hmmm, I learned to drive in my Dad's 66 T-bird convertable w/428. Anywho, yes the seats are wide and comfortable but low. Don't know if they would...
It looks like the OP has a '70. My '70 originally came with a bench seat, too, I don't think buckets were an option as the floor pan has no...
From the link in your post: "Note: We don't recommend using Ford truck bellhousings as they are deeper making the pilot shaft not engage into the...
Done. Thanks Stefan!
I have 3.89's in my 9". Good street gear, especially if you have an overdrive trans..
You just have to use 7" spark plugs. LOL
https://www.ebay.com/itm/Dorman-42002-Spark-Plug-Non-Fouler-18mm-Tapered-Seat-Pack-of-2-/152607740479
I installed the FiTech setup on mine in the spring of 2016. It's been working well for me once I got the idle tuning figured out.
I used an adaptor plate and kept my old bell housing and clutch linkage. Modified a V8 cross member (the T5 cross member mounting pad is about 1...
On my Chrysler V6 the thermostat is mounted in the left side of the cylinder block and is fed coolant from the cold side of the radiator.
How much clearance do you have on the right side?
Separate names with a comma.
