Very nice!
Just be careful about lugging the engine with those long gears and overdrive, especially if you're towing. There's a reason so many 5.0's with...
I have been running 8" wide unilugs (Cragar SST's) for probably 15 years using 1/4" spacers to make 1/2" clearance between the sidewalls and...
NAPA sells their own version of classic wiper arms, too.
Years ago I ran 'glass front fenders on mine, I don't think they were much lighter than the steel parts.
I never saw a current rating for the T5 switch so I added a relay to mine. Don't know if it was necessary or not...
I always ran Autolites in my Ebrock heads until last year. Bought a new set of Autolites because I need to run double platinum plugs with my EDIS...
The cylinders get notched to clear the rod bolts. Some H-beams with cap screws clear without notching. All I-beam rods that I've seen require...
:Welcome:from York, PA. I'll be at Carlisle.
Same here, early Mustang. Had to change the angle of the right pipe slightly but that could be just the way I mounted it, my mufflers hang a...
Besides the input and output shafts, were the internals the same?
You evidently have the coil resistance wire Krazy mentions above, not a "normal" wire to 12V. I found the wire you're asking about on my '70 right...
Yep, forgot about the hoses. And had to slightly reroute the hardlines, made a couple of brackets out of angled steel.
Yep, that's where I found my NOS quarter panels.
I've been driving them just as long. Made a noticeable difference on my car when I installed roller bearing spring perches. The only reason Ford...
And stiff and binding.
I thought the Granada spindles were the same as late Maverick spindles? I have '76 Maverick spindles on my late '70 (3-bolt ball joint), just...
There are a couple companies that makes a turbo setup where the turbo mounts in the back of the car. Then there are just two tubes that run to the...
[ATTACH]
A pair of these and you wouldn't have any fuel rails or visible injectors. You can get them in gold now so they look like Holley carbs:...
Separate names with a comma.
