Don't even start the engine without a wide band of some type (i use the LM1). Another alternative to a hat is the complete carb enclosure. Less...
The Mustang came with a 8.8 inch. Unless someone put the 8 inch in there you need to be asking about a 8.8. Which with the rite parts is pretty...
Thanks, Good explanition Its always nice to see things thru other eyes sometimes.
I'm not trying to be smart on this or anything, But i would like to hear your theory on this causing detonation, It could be something I've...
Piston to valve clearance one reason. I have actually used thicker than this to get piston to valve clearance rite, along with pocket cutting the...
Mad Max Mav, I just wanted to thank you for the effort, I to have almost stopped posting due to negative comments. I already own a set of...
Tap and plug, especially if the motor is assessable. Otherwise a expansion plug will suffice, But could blow out, especially with forced induction.
The motor stays the same.Some companies recommend that you don't run a balancer, claim that the belt serves as a harmonic absorber. The upper...
The Blower pulley is never going to work with this setup.
Unless you know for sure your buying a used 50 oz balance, I would buy new.
Summit or Jegs, There was never a 157 tooth 50 oz balance flywheel made by Ford. I had to have one built in 95, cost me about 400 bucks. Now you...
Just thought id throw this in, A blower grind cam still works OK naturally aspirated. Be one less thing you will have to do when you install the...
Welcome Im about 100 miles south of ya" I go to the motorsports park there about twice a year, Maybe ill see you next summer.
Like most other things now days, It would require a little effort, and possibly some thought.
Steel and cast aluminum have different expansion rates when heated, This may have contributed to your breaking problem. I to have been building...
What rpm does this sputter start ? Are you using the vacuum advance? If so have you tried unhooking the vacuum? This sputter is it a miss or a...
Its from innovate motorsports, It comes with everything you need. Its a little over 300 in summit. Its not just for drag cars, I use it more on...
I know you are not wanting to hear this, But the LM1 is one of the BEST tuning tools i have ever had. No more will you ever wonder where your air...
No matter what cfm you choose,( I would run a 600 or 650 myself) I think the double pumper would work better on your car. If i were you though i...
You obviously have never saw a case crack on a C-4, I have, The cast pans DO add a significant amount of strength. Think of the pan as a girdle...
Separate names with a comma.
