17 of 18
Thanks for all the comments. There will be more to come, Due to the ever tighting track rules ( going too fast for the equipment i have or lack...
No if that is the only manifold source you have use a TEE. I use the cruise vacuum as a reference for the power valve number.
Anyone that is trying to tune needs one. But only the WIDE BAND will help you.
The sensor mounts in the exhaust pipe, They recommend as far back as possible. But not so far as to allow the reversion from the end of the pipe...
I may open a can of worms, But, Holley doesn't care anymore about the end user. When my two week old blower took a dump, The only answer i could...
2-3 + or 2-3-? Almost sounds to me like a drive shaft vibe. Was the shaft balanced? Is the shaft in time? What about the u bolts on the rear...
To start you will need to know what angle your pinion truly is. I have saw them be from 8 degrees positive to 8 degrees negative. Anything more...
After years of neglect we finally have our track back. This is the first 2 passes on this track in probaly 8 years. Enjoy P.S. 6.55 @ 106 mph....
I believe it has somthing to do with that extra belt i have, Gonna have to check that out.:hmmm:
They have worked VERY well for me and they are 3 years young. The plug boots on the MSD"s would get hard and start jumping fire off the header...
http://store.summitracing.com/partdetail.asp?autofilter=1&part=ACC%2D7054&N=700+4294864973+4294908331+4294908282+4294908395+4294840126+115&autoview...
It really depends on what type converter you want. Off the shelf will work in a mild street car, But if you are running Nitrous or Blower (or...
The Accel 8MM are the best wires ive found, Used to run the MSD, Wires would break down after about 1 year. Have been running this set of Accel...
http://www.dragstuff.com/techarticles/reading-spark-plugs.html...
The 97 is fuel injected and uses hot water circulated Thur the throttle body to heat the incoming air.
3 inch cowl, dropped base air filter with 3 inch element & flow top is what i have. Without the N20 plate you might get a 3.5 inch breather element.
This is about the cheapest kit for a roots, Powerdyne sells a hang on for about 1600 bucks, Then you have to either build or buy a blow Thur carb,...
When you have the time, Ill take a set of front covers in green. Just pm how to pay. Let me know if pictures of the covers will help on color choice.
http://store.summitracing.com/partdetail.asp?autofilter=1&part=WND%2D77%2D174FSBP%2D1&N=700+115&autoview=sku
Separate names with a comma.
