This is a confusing component to buy! I am looking at the Comp Cam 282s and it has VERY close specs to the above cam. Int/Exh duration at .050...
BigDave, have a part # on that cam? I searched Lunati and could not find those specs.
They also suggested that if a solid gets too far out of adjustment, like mine did, the lifter will stop spinning and that will quickly destroy a...
Amazing! Crane suggested I send them the cam and if the lobe did go flat, FREE REPLACEMENT! Wow, that is customer service..
AS I stated above, this cam was installed in 1984! I would say I got my monies worth from it! I have always ran the valvoline stright 30w. (live...
The last cam I bought was 20 years ago and I got lucky and put together a good combination. I have changed a few things and want some opinions as...
Valvoline 30w
Silly me! rebuilt it all 300 miles ago. Just NOT the cam!! New cam bearings though. Also, rings mains, rod bearings etc...Oil pressure still...
I just like to complain!!! Now, what cam to buy tommrw ?....
Boo Hoo, Thanks all. I guess now I can do a better job than when I built this thing 20 years ago in matching parts. Although, I got lucky with...
The other pushrod on the same cylinder comes almost to the top of the stud whil the suspect rod is significantly lower. I will pull the intake...
wish it were Rick. But they are solids, nothing to break inside!
Checked it, it is less :-( What could be wrong with a solid lifter? I a assuming it is the lobe causing the lack of lift.
Here is my cam. The cam is a crane #363841 solid lifter int .553 exh .555 dur is .284/.294 .238/.248 @.050. I will try the scribing idea, better...
Yes, screw in studs, tight. Swapped arms, no change
Looks like it is lifting about 1/4" to 3/8" less. Hard to tell really
Dave, the jam nut is removed and I cranked the poly all the way down. As I turn over the motor the arm does travel up and down. Without a dial...
Did I flatten one? Went to adjust the valves tonight on my solid cam and found one of the lashes VERY loose, over .50. Loosened the lock nut and...
Derrick yeah I know. This fiber hood ended up VERY expensive! Don't worry I will be at your door in a couple of years!!
I have my first car show coming up in a week or so and had a question and a thought. I have a pinned on hood that I am at a loss as to how to show...
Separate names with a comma.
