Sounds like you might have a bad connection between the ignition switch and the coil + terminal or a bad ignition switch. I don't see another way...
Generally true in NC too. But, any vehicle 35 years old or older doesn't need an inspection. :D Horns are great for getting people on cell...
Truly amazing!! That looks like a great too. Thanks for doing it.
That's what I was thinking but wasn't sure with those tires. Since lighting 'em up isn't an issue, I'd use an online RPM/ratio/speed calculator...
If you're going to work on it for 10 years, it will be a lot more fun if you have a good work space for it. A disassembled car takes up two...
Maybe because I've almost never been a crime victim, I don't worry a lot about it. (Did did get my tires slashed once but how would you prevent...
"... brain fart or old age ..." Earl, they come with old age. :mad: Glad you got it fixed so easily.
I don't know your situation, but it doesn't have to cost much if you can do the work yourself. You can either get some used Econline springs (see...
Oil Separator/PCV Valve? Seems like a combination oil separator/PCV valve that would slip into the valve cover grommet and drain the collected...
Installed the billet PCV valve from Summit http://www.summitracing.com/parts/BSP-22120 The plunger ALMOST makes it to the top of the valve with...
When cranking, the negative terminal on the coil should fluctuate between near zero and 12V as the points make and break a circuit to ground. Not...
Right. I woke up this morning with the realization I had messed up and went back and edited that post. Sorry for the confusion. Thanks for...
So glad THAT didn't happen!! :yikes:
Probably for the early 1960s Comets. Rick :huh:
When the key is on you should see 8-12V on the + terminal on the coil. You should see near zero volts on the - terminal on the coil if the points...
Does the coil have power when the key is in the "Start" position? Does the ignition fire if you "hot wire" the coil?
That setup looks STRONG with upper and lower A-frames AND strut rods. Would have been better if they'd made shock tower replacements that...
I like it!! :thumbsup::D
Does that single A-frame look strong enough without a strut rod?
Greetingins and welcome from North Carolina.
Separate names with a comma.
