Best 1/8th ET so far with the 3.00 and 274 RWHP was 8.2XX at 85.XXX MPH. I guess with 3.55 my cruise RPM would be around 3500-3800. I'd like...
May be be a minority of one but I like the 3.00 gears with my 347, C4, 235 60 15s, 2400 stall converter and Traction Lok. It'll smoke street...
Thanks for the responses. You guys aren't buying the 5 degrees up rule, are you. Was thinking I'd get the axle set up while the truck is apart...
Long shots, but worth checking the easy stuff first -- if its auto, look for transmission fluid in the vacuum line coming from the modulator and...
How well does that fan fit/mount on the Maverick radiator?
I may need to get the spring perches relocated on an Explorer rear end. So far I haven't found anyone local that routinely does that kind of work...
Lokar Kickdown Bracket Here it is.
I had to mount the bracket on a different bolt than the instructions indicated. Can't remember for sure, but I might have disassembled the cable...
X2. It will ELIMINATE surface rust. Wet the area and let it sit for 20-30 minutes. Wet it again, wire brush it, clean it and the metal will...
I wouldn't feel safe without a spare. I was thinking more along the lines of a nice clear urethane on some Oak planks with nothing going in the...
OK, Broncos are probably out. Think its between the '70 9" with custom axles and the Explorer 8.8 with new spring perches. When you did your...
Yes, I came across that too. Not sure how easy there are to find but definitely belong on the list.
Love the lines of that truck!! Very clean. That's the look I'd be going for but maybe 2-tone, Sprint-like or gray/black. I'm thinking I can...
On your friend's car with the voltage gauge, you could test the voltage directly across the battery posts and compare that to his (switched)...
I don't know about the axle interchange either. Might be simpler to use an 8.8" with 5X4.5" bolt pattern and leaf springs, if there is such a...
I've made two trips now to look at the F100. Its a really solid truck. The area behind the front wheels on both front fender are rusty but new...
You're going to get a LOT of :tup: Looks great!!
I also have one. No problems.
Yes. Look under the dash and you'll see it.
Check the brake light switch on the brake pedal. Hope its not the turn signal switch. :cry: I haven't been able to find one.
Separate names with a comma.
