A machine shop could probably get some dimensions from your manifolds and make a pair of flanges pretty cheap.
https://www.ebay.com/itm/2-1-2-2-5-ID-Flat-Oval-Two-Bolts-Exhaust-Flange-Fits-2-1-2-2-5-Pipe-Flanges/173520636715?_trkparms=aid=555018&algo=PL.SIM&...
Sounds to me like he needs the flanges for the pipe ends that slip over the studs on the manifolds. BTW, those hipo manifolds aren't that great. I...
I have an old Eelco Mustang cap from the late '60's. The cap is smaller in diameter than the stock Ford caps. I can get a better pic tomorrow if...
Many decades ago I did that to my Maverick. Got the leaves from a Ford station wagon in a junk yard. Jacked the car up, removed the two bottom...
Just remembered. I don't know if they still sell them, but a friend of mine back in the '70s had a '72 Grabber that he put some kind of air bags...
Doesn't cost much to get the leaf springs re-arched.
I made my own gaskets out of some thin white foam packaging material I found at work.
I have '76 discs on my '70, using the '89 Ranger MC. Feels the same as my drum brakes did. Aluminium body and a plastic reservoir, very...
You can't go wrong with a cam from Buddy. And yes, he'll want to know every detail about your car.
All depends on how far off base the person picking the off-the-shelf cam is. If the person is relatively well informed they can probably get...
Where are you considering going for your custom cam?
Sorry, I have to ask... Is the charge wire connected to the battery side of the starter solenoid? If so, it sounds like the alternator isn't...
I like the wheels!
There is such a thing as too much vacuum, too. Intake vacuum is a function of how much restriction in the intake tract (valves included), how hard...
Custom cams are great for giving you exactly what you want/need for your particular engine, trans, gear combination. But, change your combination...
A little bit better price: https://www.cjponyparts.com/cpc-t-5-adapter-plate-for-6-bolt-bellhousings-1965-1973/p/T5AP/
https://www.ebay.com/itm/Car-Ignition-Switch-12V-RFID-Engine-Start-Push-Button-Keyless-Entry-Starter-Kit/143475733756?ssPageName=STRK%3AMEBIDX%3AIT...
Comp Cams recommend setup with the XE274 is 2500 stall converter and 3:55 - 3:73 rear gears. No experience with that myself as I've always had a...
Most that want to run an XE cam in a 347 go with the XE274HR. It's proven to be one of the best off the shelf cams in a 347. The XE264 is really...
Separate names with a comma.
