I just rerouted the original lines and made new brackets out of some slotted angle I had laying around.
Not familiar with the later years, but isn't part of the filler tube still in the trunk?
I ran a 3/8" aluminum line back to the gas tank filler neck. [IMG]
I remember Joe Sherman saying that when he was at Edelbrock they developed the Performer RPM to replace the old F4B. Said the RPM was worth about...
LOL I couldn't do that. My car doesn't have a glove box... So I don't even have a distributor.
If you use a roller cam block the go to off-the-shelf cam for a 347/351 is the Comp XE274HR.
My shock towers are notched, too, but that doesn't help with header clearance. The headers sit lower than that. The notches along with modified...
If they're long tubes like my Hooker 6901's I find it easier to have the motor mounts unbolted and motor jacked up so I can move it from...
Yep, the AFR 185 Renegades work great in both applications. Run a cam with valve events tailored to a 302 for now and when you go 347 or 351...
For a 20 amp circuit you would typically use 12 AWG and 10 AWG wire for a 30 amp circuit, if it's a constant running pump. If it's powered by a...
Frank, what AWG wire are you running? If you're using the correct gauge wire you pick the fuse or breaker to match the wire size.
When I was having "issues" with mine I found the wire that energizes the solenoid at the connector on the right side of the column and used a...
Earl, do your arms get tired with that manual pump? (JK, everyone knows you meant "mechanical", I couldn't resist)
I had an Edelbrock 6-valve pump on mine for a short time. Shot oil out the holes in in the top and went all over the driver's side of the engine...
What I've experienced so far is that drinking mass quantities of alcoholic beverages seems to keep the virus bugs at bay. (Hope I didn't just jinx...
:Welcome: from York PA. When I was about 7 my mother had a new rose colored Comet with a small V8 (221 or 260?)
When I bought my '70 the previous owner had installed one of those universal shifters with the big a$$ mounting bracket like in Craig's picture....
I have the FiTech EFI. Back when I bought mine the setup manual was basically useless, I learned more reading online. The only issue I had...
An Eelcco cap is what I've had on the car since 1973. A couple years ago I took it to a powder coater to get it powder coat chromed because it...
Since it's meant for an early Mustang the mounting holes are in the same locations as the filler pipe holes, it just bolts right up. The cap is 4"...
Separate names with a comma.
