hello I was not realy sure if may port and polish job was good or even right:huh: , so I took the one head that i have done to the head shop and...
The shop going to replace the crack piston for me at no cost :D :bananaman Nice Engine bmcdaniel wish mine was a 347 but i can hardly afford...
How much power can a stock AODE/4R70W transmission take? The AODE/4R70W in stock form can typically handle about 25 to 50 horsepower above stock...
Thanks I know its takes a lot of body work to get it right but i figgerd if i am restoring it I should do it right or the best with any color....
My planes is for the Maverick to be black with red striping down the hood , top & trunk I have also specialy orders a red grabber side striping...
Hello this is 2 pics my 89 5.0 block bored 30 over with Speed Pro Hypereutectic H273CP pistons and the color of the block is Ford red I have the...
Hello here are 2 pics of the heads the top head is still stock and the bottom heads is ported and polished on the exh ports and bowls. I still...
Thanks for the info but i all ready have it i have a printed out copy seating on my work bench. thanks
Hello My dad made me a metal template same size as gaskit with a long screw in the middle today and i ported out a little more on the exh runners...
Hello all, this is my very first time trying to port and polish any type of head so I am willing to take any tips i can get. I have done 2 exh...
the center caps i have are the ones for the magnum 500 wheels and the decal sets about 1/4 in inside the center cap and there is no way to get to...
I have a new set of center caps, how did all of you remove the mustang decal with out scaring the center cap it self. thanks Jim
Thanks Everone we got it going it was a 500cfm 2bbl holley carb on my cuzens 70 ford truck.
I would say for the set up you have now and if you add headers I would go with a 270 comp cam or if like it loppy 280 comp cam. just my :2cents:
Hello I was told the electric choke uses less than 12 volts:huh: but can't find any info stating what voltage is required for the electric choke....
The cam that i am now using is A Erson roller cam and it cam with a paper that says this camshaft is compatible with stock type steel distributor...
I have a 89 302 that was not an HO but was SD & it had a roller cam. I am going to use a carb set up with it not the efi and was woundering what...
check out Grabber351 site he did the cut. I been thanking of doing it my self with my 302 just for little extra room....
What is a semi auto?:hmmm:
As far as i know c4 was the only auto trans offerd in maves and i have never heard of a c3 trans
Separate names with a comma.
