Little late but here is the pic of the damaged port:angry: :(
Hello I call castiron welding service and they told me ELE welding on a iron head or block with nickel is a no no and said they use a wire feed...
Talked to the guy today that welded on my head and he told me this is yes first time welding on castiron with a nickel rod but any way I let him...
I grinded it down this morning and I going to have him weld it up tommorro. he doesn't work on sunday because he goes to church.:162: I will...
exhaust side I am not going to port the intake side just going to clean them up with 60 grit sand rolles
Hello I started grinding on the nickel weld in the port this morning and That nickel is a alot harder than castiron Bad new is there is stell a...
The guy got it welded up (I hope) doesn't look pretty right now. I hope I can grind it down to flow with the port good but he told me that nickel...
Hello I fill so stupped:hide: I was working on my 2nd head porting it out and using the cyl shap bit i didn't pay close enough attention to my...
I have a torqer 289 intake the one that the carb sets a little side ways on it. I was told that it would not clear a mustang hood so i figgerd it...
Hello what Intakes will fit under stock Grabber hood??? with out cuting a hole in the hood. thank Jim
Hello I have a 89 5.0L and it has the 1 peice rear seal but I have the option of a rubber 1 for 9.99 or a teflon 1 for 19.99. Which one should i...
Hello I like to put my doors off my 73 on my 70 i like the 73 inside door arrest and door handle better than the 70. thanks
You can always trim the shock towers some thing i been thinking about doing any way just for the little extra added clears to work with the...
I have also seen headers on gt40p heads in maverick on ebay and i asked him how he getbthe headers to work and he said on the driver side he used...
Here is a link to rust bullet http://www.rustbullet.com/ProductCart/pc/mainIndex.asp
I Plane on trying to get these heads flow benched to see what increase in flows i was able to get from port and polishing the exh ports and bowls...
Thanks Maverick1970 for the info :thumbsup: I can say I learned something today:clap: thanks again
Hello thanks for the info but what do you mean by timing covers are different standard and reverse rotation water pumps? you got me on this one...
Hello I have a 89 5.0 but my timing cover that don't have the spot for the oil dip stick or fuel pump, I know I can run a ele fuel pump but can i...
I guess i shoud have posted this here instead but here is the link to the other post on my gt40p head porting with pics....
Separate names with a comma.
