The valves are usually the closest during "split Overlap". This is on the end of the Exhaust stroke and the beginning of the intake stroke. As...
One nut jammed up against another one, Kinda like a jam sandwich except with nuts :thumbsup:.
32 mpg and 600 hp, A Blower is definitely in your future along with a perfect tune. Then the 32 will still be a question, We do have 2 Mustangs...
What about a jam nut?
Just be sure to replace with a fusible link or an in line fuse.
If a 8in is built rite, Good axles and the good chuck housing ( i think they have 3 horizontal and 3 vertical bars). They will stand a lot of...
If you have hooked the battery up like its wired now you will have to replace the fusiable link. The big wire you have grounded is the HOT from...
You cant sell me on the more HP statement, A 1471 supercharger can feed 8000 hp. Ive never saw a turbo anywhere capable of that. Most turbos that...
The car show will be at the Bankcorp south coliseum. Its across from the old fairgrounds, Or main street don't remember the exit. I will try to...
Use the SEARCH button and you will find this question has been answered a thousand times, And yes a C-5 will use the same procedure as the C-4....
I would come for a mini meet, I probably will be up there anyway. Just let me know when and where. Are you planning on showing or just going?
There is Nothing wrong with either, We have 3 cars with centrifugal chargers. The only problem you will find is you need to be injected to run a...
It was, Till yesterday. I figured the guy had dug this up for research and still wanted a new opinion. Yours still the same?
A roots type supercharger like the Weiand will require additional hood clearance, AKA Cowl hood. Don'T cut the grabber hood, Find a regular hood...
If you really want super smooth shifting try the GM synchromesh.
Put a surge tank on it as was stated, This not only keeps the radiator full but also cuts down on the pollutants that eventually find their way...
I also recommend a safety solenoid, This goes in front of the regular solenoid, Where if the regular solenoid hangs due to trash the safety will...
There is some aftermarket gears out there (china made i think) That doesn't match the pitch on the cluster shaft. I have never gotten a hold of...
This is a tricky question, Because you have not said what your total timing is. And is your balancer timing marks correct (True TDC ?). If you...
Im not sure of that part as i have never fooled with the 250s enough to know, But i would go as far to say if it will bolt up and the six had a...
Separate names with a comma.
