There are usually one or two Mavs at the local Pick N Pull's at least everytime i've gone i've always seen one. Last time I seen a 71 Comet, and a...
The biggest one that comes to my mind is floor panels... From other posts i've seen I know i'm not the only one that needs em badly. Also Gas...
I'm planning an upgrade to one of these myself I would like to use the Ignitor II but I dunno if they make one for the I6, at least Auto Krafters...
The biggest Pro's to Silicone Brake Fluid are of course it's high boiling point, and it's resistance to moisture so it supposedly lasts alot...
Thanx for the assist guys, it finally gave, my friend got under there with the torque wrench and I held a screwdriver up against the ring gear as...
Ok I finally got my Transmission out, as well as the clutch, right now the car is on stands (both front and rear) the engine is being supported...
Pop open the Master cylinder, if it's the original one the cap is held on by a 1/2 inch bolt. To flush the lines get a bleeder wrench (I highly...
How bout spark plug changes? Thats lookin to be a tad impossible.
If you have a tilt steering column you can remove the cylinder by using a stiff wire (I prefer a small pen or paper clip) and pushing in on the...
I dunno mine is pretty loud I mean it rattles the house everytime I manage to crank it over. I've been told it sounds like the roar of a tornado...
I can't see myself parting with the I6, not saying I don't ever plan to gank it out of the Mav in favor of a V8 but I can't see getting rid of it....
Unfortunatley mine appears to be integral to the flywheel, seems like alot of things are integral with these 6's. I can't even change the intake...
Ok rather then make a zillion posts about every problem my car has (at least the one's I've discovered) I thought I would condense them all into...
The charcol canister is easy to remove. The only thing holding it on is a retainer ring just loosen the retainer ring bolt (no need to remove it...
I'm working on getting mine fully road worthy that was gonna be it's Christmas present, almost there :). Gotta do some after Christmas shopping...
Now that is a rare find indeed. I would love to be able to do the same thing to mine the rear right floor panel is really bad I pulled up the...
Wires are new too I bought those when I bought the plugs. Thanks for the info Mavaholic much appreciated :). My mistake whenI bought the plugs and...
Can anyone tell me what the proper Point Gap setting is on a 71 Inline 6 200 CID?. I plan to install my new Motorcraft Dist Cap soon and I figured...
I just got done dealing with Klez myself I dunno where I got it from, fortunatley my address book was very small almost nonexistant as I hadn't...
I've been pondering this one myself as well. It seems kinda silly to have just a 2 setting setup every car i've ever driven old or new has always...
Separate names with a comma.
