Maybe a mav 2 door wagon with all the goodies
John I ran my lines along the starter side of the engine . Get a GOOD quality bender and double flaring tool take your time and think about it...
What headers due have ??
Mo Due you need the glass OR just the gasket change????????? If you just need the gasket change drive up to moreno valley with a 6 pack of...
Due you have a chrome plating shop in your area I would start there most all chrome plating shop will polish wheels
Action date 10/19/09 item # 14596259 listed under classic on page 14
Volt meter is my vote safer Amp meter runs all the voltage thru the meter if the meter goes bad your dead in the water ( ROAD ) I lost...
If the noise is that bad you need to find and fix it BEFORE you go anywhere ..
Maybe you can use some gas tank sealing compound. The biggest problem would being able to get the sealant up on the sides of the vent.. Or get a...
Mo Safelite didn't due mine . But the same shop who did mine 5 yrs. ago called me back and for 270.00 and your gasket they will due yours ....
The 289 i had in a 56 f100 .I did a tear down for low oil pressure . I found 3 broken main caps ( no noise ) one complete set of rings ( 3 rings ,...
Mo I live about 100 miles north of you and I got my new windshield install for 235.00 to 240.00 and I supplyed the gasket and they came to the...
I have heard that a 69 - 71 mustang a/c box will work
Tiger My favorite would a Miller or Lincoln 110 volt with mix gas or co2 . I don't like flux core. When using welder have circuit for the welder...
LED don't heat up and yes the guy is FULL :bs: I bought my LED at a big rig truck lighting store the 194 replacement bulbs
Scott The answer is NO you all need to put fittings in both sides..
Jeff I would run grounds from batt to engine block than engine block to body / frame .. Check your cables for swelling .. If you have corrosion...
watch this video from germany, watch the right side 1 min in. http://www.blinkerfluid.org/video/T1inLaSource-2.wmv
No but there a standard 7'' size and there is not any reason they should not fit .. Jay
Need your help. I have a g3 alternator on my mav I am using a 8 gauge charging wire from alt. to solnoid works fine but due to high elect. demand...
Separate names with a comma.
