Thanks, Dave. Not a lot of dimensions, but several alternative fans that bear looking into...
Don't remember seeing any fan articles with dimensions. I'll soon be needing an electric fan for my Rambler project, the radiator is 24"w x 19"h...
I think Willie at RCM usually ships 550# coilovers with his kit, I asked for 450#'s on mine because I'm all aluminum...
How about a freebie?
First I've seen RCM sell thru a reseller. Wonder what the price would be straight from them?
That reminds me of when I V-8'ed my '78 Chevy LUV truck back in the early 80's. I had installed a 350 with the small B&M supercharger and told the...
Can be easily checked. I do my initial alignments by eye and they're pretty close. My tire (as posted in the other thread) is no where near that...
I know doing Explorer brakes on a 9" requires a spacer around 0.220" thick to either slightly preload or "zero-clearance" the axle which keeps it...
AN -10 threads are 7/8-14, while 3/4" NPT has the same thread count, the diameter is over 1" so they shouldn't be able to get "mixed up"...
If it's this one, the fittings are -10 AN and NOT pipe threads...
The nice thing about a 9" is: Once you get it set up and decide later on to replace the spool with something "more forgiving", all you need to do...
In (my) order of preference: V-band clamps (best but pricey) Ball-socket fittings (cheap and easy) Flanges (sealing and warping issues, need...
Here's a pic of mine with standard spindles and the car raised UP as high as possible. The tires are M&H ROD-02 front runners (26" x 6.7"). I'd...
That's "Quick Performance" out of Iowa, they are great to deal with! I bought a narrowed 9" housing and axles set plus a billet side cover for...
There's an open-source project 3D printer that does 24"x24"x24" in kit for for $3950 and assembled for $5450. After doing some light research, it...
Done! :) My progress is quite a bit slower than Levi's though. :huh: Sucks to get old. :cry: The conundrum here is this. My comfort zone for the...
Carl, sent you an update last night. Thought you were on my "mailing list", guess not. You are added now! :D
I've got the Speedway version of this, with my Billet Specialty wheels, I have to remove them for it to work. I measure from the a-arm to the...
The spec's I used are: -3/8° camber, +4° caster, and 1/8" toe (in). From what I see, caster is closer to zero with manual steering but mine's a...
Those bulbs are so hard to install it's scary. I always use a piece of hose to push and turn the bulb in case it explodes in my hand...
Separate names with a comma.
