I've used Pyle Bros before. They're an hour and a half drive for me, so we arranged a time that they could do it while I waited. Good shop! Scott,...
If you're handy, check this out...
Wasn't Scott (Scooper) parting out his old drum brake stuff in another thread?
You could prolly use an allen head cap screw (with the head shortened in a lathe or with a saw or grinder) if you could find one with a long...
Is the master getting full stroke? If not, you might be able to drop the pedal take-off point a bit and increase the stroke...
I see nothing wrong with selling Chinese parts or knock-offs, as long as the vendor states so. The problem arises when they lead you to believe...
One of my four original (early 90's) HF grinders went out a few months ago, the gears "lost contact". The output shaft had some play so I tried...
Well now, that's the exact opposite of my HF grinders. On the four that I have, the inner ring has two different hub steps for different thickness...
I've never seen this "tab" design, and as stout as the RCM crossmember is, I feel the frame rails themselves (being sheetmetal) are now the...
The RCM lower tube is one-piece, full length...
Just looked at the new RCM kit I'm putting in my Rambler, Willie has added some stiffener plates to the crossmember instead of gussets. Either...
Nice cars! Virginia? Those pits look just like our local track in Evadale, TX...
Frank, I've seen it done like this. Four triangular tabs, 2 on each lower strut boss, front and back. Only one shown here...
It's pretty easy to pull the aluminum bodied rivnuts, but steels are another matter. I have the HF hand tool that works "OK" up to #10, but any...
Minitubs and springs relocated 3" inboard, lots of work but 325's fit great!
Same here (69 Mustang tank)...
Can't wait to see how yours compares to the RCM version! :thumbs2: I'll have to quit working on my current project soon, it'll be too hot to get...
That roof made me think of a baby stroller. :rofl2:
As long as it's not acid-based stuff like Ospho. I left some 3/8" x 1" bolts in a jar of Ospho overnight and ended up 1/4" x 3/4" lumps the next...
Pinion "down 2°" is all well and good for stock leafs w/o any traction devices. Caltrac's do not allow the pinion to rotate, so throw that out......
Separate names with a comma.
