I'm getting ready to buy a flywheel for my T-5 swap. Are there any specs I need to pay attention to other than tooth count and imbalance? I know...
The carpet you linked to is ACC. If you read up on their "mass backing" it says all their carpet is manufactured by ACC.
I'd try it without the torch first. Depends on how much clearance you need.
Or, use a hammer to lightly persuade the shock tower out of the way a bit and install 90* zerks.
Bondo and bed liner are cosmetic fixes at best, and not very good ones. That metal will need to be removed and replaced, otherwise you're doing...
Like they already said, that torque box needs to be fixed correctly. That's a structural part of the car. The floors are as well to some extent,...
How is bed liner going to take care of quarter size holes?
Eastwood makes some stuff now that is like dynamat, but cheaper. $130 a box right now if you buy multiples. Thats what I plan on going with.
You're probably right, I just tend to do things to the point of overkill. The good news is that is that now every speck of rust is gone from my...
Hmmm, must've been operator error than. I just didn't seem to get a good arc off the metal with the primer on it. I'm new to welding though, so...
I plan on seam sealing from the floorboard side. I'm afraid of sealin the entire box without knowing that its extemely well protected for exactly...
I tried that, and I'm convinced that weld through primer is a lie. Welding through it sucked. Also, I thought that primer needed topcoated to...
That was another idea I considered. Any recommendations on brand for undercoating? Eastwood has some stuff thats made to be sprayed inside frame...
So I just finished rebuilding both torque boxes. Not fun. Not the worst thing ever, but not how I like to spend my garage time. I painted all...
That looks pretty similar to my T5. Came from behind a 3.8 V6. Its internally the same as the ones behind 8s and the bellhousing bolts right up,...
That's my dad! Its my old 69.5 Mav. Nice to hear its on the road. Its got some overheating issue right now being worked out.
Couldn't you just cut the collectors off at a slight angle, rotate them 180* and weld them back on pointing more inboard?
GrabberGT, that looks VERY clean. What gauge steel did you use? I'll be doing mine soon.
You're welcome. I did my swap with my laptop sitting on my hood and that PDF open.
Also, go here, and download this PDF. Its a life saver, I promise. http://www.discbrakeswap.com/instructions/file/3-granada-swap
Separate names with a comma.
