I lost about 1/2 of an inch of ride height by installing 6 cylinder springs and I would have to say you get a LITTLE better weight transfer with...
I have heard that one before and it has just never panned out for me when I am trouble shooting a miss . But I always make sure even though it...
I have always used a high pressure pump as piece of mind but I really doubt if a little teeny tiny engine like a 302 would REALLY need one ....
2450 lb car (no driver) victor junior intake 750 mechanical 69 windsor heads custom ported by some loser callede 'ME' 1.92 x 1.60 valves...
I have had the same set of milodon ( couldnt get ARP back then ) 5/16 rod bolts sinse 1989 . Probably have about 450+ passes on them , and the...
How old are you ?
No not really and if you did your whole pollution system would have to be in new or near new working condition
Glass hoods (pinned or 1/4 turn style) weigh less than 15 pounds . I would say a steel hood with hinges would be around 75, maybe less
71 GT
Bah !
Doesn't Mcloud have some fancy setup that puts the slave right in the bellhousing on the throwout bearing itself . I put one on a duster once...
What do explorers use for a diff ?
Up here in Canada all the feds care about is making sure our cars dont have rust holes in them so the exhaust doenst get in . I feel for you guys
Have you access to a 10 feet of hydralic hose and a guage that goes up to 300 psi If you do there is a port on the tranny that you can hook...
I put the shortblock of a 460 in once for giggles and that is all I could get in . Same thing for a 428 FE block
Not really .
Someone else pointed out that you are wasting time and energy going up instead of ahead which is right . Just concentrate on your 60 foot times...
As long as the fittings are steel and NOT aluminum or brass you should be ok .
8 or 10 would be a good guess as long as it doesnt have one of those vacuum retard distributors.
Thank you Mr. Relic
Separate names with a comma.
