I got the kit installed no problem car took alignmnet fine runs straight as an arrow.....Midolyine rubber squeeks a little but no problem driving....
Thanks for the advice always looking for ideas.. I have decided the car will only be on the street to go to local shows and possibly a cruise or...
Ricky I am running a 302 w/edelbrock rpm intake 1 inch spacer, holly 600, msd ignition, mild cam, hooker headers,duel exhaust,c-4 trans. 2.79...
I have found an 8 inch mustang rear from a 1967. This rear is approx 3.5 inches wider than our standard rears. Would this rear give me more...
Thanks ratio I am collecting 8 inch chunks right now for various ratios until I find the one my car likes...They are free just have to pull them...
maguires mirror glaze plastic polish
check your vaccum line to the transmission mudulator should run from the manifold to a hard line back to the rear of your transmission..That would...
Is it true that the ford 8.8 does not have a third member, chunk?? Only the 8 inch and 9 inch have third members??? I was told that I have an 8.8...
Okay today upon reviewing tapes and photos of last night every launch my car threw about 1-2 gal of fuel on the track.. right out of the fill pipe...
Stock suspension going to swap out the old sagging springs for a new set of 4 leaf maybe this weekend. Already have new stock shocks...Also...
1st run r/t .598 60 2.356 330 6.442 1/8 9.800 mph 73.50 1000 12.735 1/4 15.250 mph 89.76 2nd run 14 minutes later r/t .079 PERSONAL BEST OH...
I must be doing something wrong I am running highway speed 65-70 at 2500-2700 rpms that would put it at 2.79 I don't know what I am doing wrong...
drop out center section 8 inch and yes both wheels are off the ground...
I have a ford 8 inch rear when I jack up the car and turn the drive wheel one rotation forward I count 1.3 rotations on the driveshaft what would...
Ratio I have a msd ignition with electronic distributor..I Moved the line from the carb to the vacuum port from the manifold... With the new 1...
Ok I have a holley 600 80457 with vacuum secondaries..Now the only vacuum line hooked up runs to the transmission module..I know the intake...
what does the 351 heads do for the 302??I have a donated 351w and c-4 was going to tear down and stroke out motor but might check the heads for my...
Ratio no wheel spin the car is sputtering/hesitating then taking off..Flys through first shift at 5000rpm builds up to second shift at 5000 then I...
secondtime was basically a hot lap and changed lanes...
Separate names with a comma.
