Earl, thanks buddy. The carb is new from stovebolt, i had some jetting issues but have resolved them. This thing is clean as a whistle. That's the...
73 Maverick, 250/C4 Stock engine with header, duals, holley 5200 on adapter and DSII ignition. OK...I got the lil 5200 jetted up, float level...
I'm having trouble aligning my hood on our 73 Maverick. Seems no matter how square I get it, it still hits the cowl when raising it because it...
Jamie, Thanks...that does look like one end of one of the lines...but from the overall shape of mine I dont see how its going to route right. But...
See if you guys can help me out. Just reinstalled the motor and trans (250/C4) in our 73 Mav. While the trans was out I removed the steel vacuum...
Anyone know another source for six cylinder headers? FSPP has put their low-mount starter headers on hold and I've heard its hard to get anything...
Yup....you're right. Evidently if ya dig deep enough in that lil bag of parts that came with the caliper you can find em! Nice and quiet now....
Load clips? I'm not sure what you mean by load clips. I originally put the car together with the junk yard calipers..but replaced them with new...
A'ight....fixed New wheel cylinders fixed the lock-up problem, however, I am less than enamoured with the performance of the new front discs so...
I found the culprit........ one of the previous owners had installed (rigged) an odd wheel cylinder on the right rear. I'm sure that was causing...
OK guys, what do you think? On my 73 Mav, the right rear drum locks up prematurely. Newly turned drums, new brake shoes, no leaks. I figure on new...
Rear bar I plan on mounting the stock front bar to the rear and see how it balances out.
Just added one to our '73. No, it does not fit correctly. Yes, it is effective. It was cheap. The car corners much flatter now and is far more...
Looks like an American Racing 200S to me. Brad
A picture is worth 1000 words right? Check it out:...
Sure, we should be there. Not sure how much we'll have done by then, but we'll come anyway. Brad
thanks..... Yes and no....lol. I'm pretty sure the same spring perch, springs, balljoints, etc. will interchange between most years. But what Im...
I'm sure most of this bas been covered but I still have questions. When looking at high performance suspension parts for Mustangs, many of which...
Check this out. http://www.thecarsource.com/shelby/restore/lowering.html
I mean this: On the Mustang, Shelby relocated the upper control arms on the front suspension by drilling new mounting holes 1 inch below the...
Separate names with a comma.
