Is torque box that low part of the frame under the front door?
I got a PM saying that the rotors are on the wrong side in my pictures. Are those grooves direction-specific? And what would be a good jacking...
OK, guys. Loosening now!
If it already has a light coat of rust, or any other rough surface, the POR-15 will stick good. Just lightly brush off the large flaky rust, and...
Yes. WAY more comfortable with the welds redone. Gene, are you suggesting that NOW is the time to loosen the A-arm bolts? Retighten now, or wait...
I have used lots of POR-15, and it is great stuff, but not in direct sunlight areas. It turns gray, and gets flaky and fails after several years...
Good call! This is actually in the R&C instructions to do that after all the weight has been put on them.
Currently, without engine, car sits pretty high.
Got it all installed today, so starting this thread over from scratch. After cutting all the old suspension off, and I mean ALL of it,...
Finally got the Rod & Custom front suspension put in, and all four wheels back on the ground. Still need to hook up steering wheel, and put engine...
What would be benefits or hazards of using Mercon V vs Type F? I looked up the history of the two, and Mercon V seems to be the top of the line...
WOW! Less than a quart! Thanks again, Paul!:thumbsup: So in reality, would it make a difference to run one or the other?
I will ask on a local mustang forum. I don't personally know anyone who drives a 5.0 stang.
Remember a couple months back, I was out of town and I posted about my wife stalling on the road in my truck? We were long-distance diagnosing it...
Are you getting a code on the check engine light? My dodge has done that a couple times, and every time it was just a mass air flow sensor or...
Yeah, for $200 go for it!
I don't want to use it as much as just decorate my garage with it. Of course, I would try, if possible, to restore it to working condition, but...
Lee, you brag, but when I look at your images, I see a bunch of "pro-jection" stuff, and no pics of your cragars. So POST PICS OF YOUR...
On the new Rod and Custom kit I recently installed/am installing, it says to crank the nuts down until you can see three threads above it. I...
I would think if you hooked the charcoal canister to a vacuum port, it would create a "vacuum leak" situation with your carb. Just run it into the...
Separate names with a comma.
