And just HOW do you know cragars? :biglaugh: I agree. The mr gasket washers i use have all bent and warped. They are junk. Going to buy american...
Same thing I do. It doesn't HAVE to be the top two bolts, but I do them that way since they are already up there and I can rock the rim back and...
NOTE! If you just put on one nut and run it up with an impact, it will not be centered, and you will be replacing lugs after you strip or...
They are easy to put on. The secret I use is to put on the top lugnut half way, just enough so that the base of the nut is inside the hole, but...
Plenty of room around the headers? I guess worse case, I can install the header on one side, and measure, or even install the engine. Getting...
I was hoping to not do that, but there is no reason I can not. It would have been nice to be able to get into the engine bay and put the...
FWIW... I have 240,000 on my 5.7 hemi, and already have a line on a new and dealer installed engine for around $5000+$1600 labor with 3...
Some of the things I tried to make it run cool before I swapped radiators. various sizes, brands, and quality thermostats. using no thermostat...
Mine is .040 over. It did overheat. But not so much because of the .040 as much as adding more cam, heads, and all the other power additions. It...
A question for one of you guys who has done this modification... My engine has been out for so long, I don't remember what it looks like around...
Those things look like FUN!!!
Last year? Probably not. I drove it much more the couple of years before. I hope to drive it more when I get it all back together with decent...
I can get 20 mpg on my car if I keep my foot out of it and drive it like a granny. Or, I can get 1 gallon per mile if I take it to the track and...
I actually drove mine around stock with just the muffler cut off. Wasn't really loud, but sounded pretty good. Then used long glasspacks in side...
Cam only works if heads allow it to flow. Exhaust can make the sound without heads and cam.
What are those big turbines in the background of the first picture used for? Nice looking car, but they are not worth as much as we think they...
[media] Long tube headers. Flowmaster super 44 which are a little louder than regular 40s. [media] The lopey idle is due to the cam....
Here is a picture from underneath, sorta. Difficult shot to get with a cell phone. The shock slides up from underneath, then bolts in at the...
If you weld a plate across, then you close up the hole that you shove your shocks in during installation. This was why i wantyed to originally...
Yes, without the shock, those balls are what stops the travel and they are bent all the way to their extreme. That is why I put the wheels on and...
Separate names with a comma.
