Have one, won't fit. The thickness of the wall of the box end is too thick to fit between the bolt head and the header tube on most of the bolts....
The allen head is worthless on most of the header tubes. Just cannot reach the holes. I have used the 12-pt bolts in ARP, and again, pretty much...
I noticed a lot of spam this morning. It is a lot of work keeping up with that crap.
So, possibly a channel riveted or screwed to the lips of the radiator? I could do that... I just figured that if I have my car all apart, I may...
Anyone have any idea how he riveted that top sheet to the radiator? Mine is similar, but I have spacers under the sheet that snap into the...
Good to know about that A/C hose. I get to crawling around under that hood every 50k for throttle body cleanup, and tuneup. I now just take the...
I cannot comment, because I don't know how those are installed.
I took the adjustable bumper out of the hole, installed the hood pin in the hole, and put another piece of rubber on the pin and cut and ground it...
[IMG] I installed mine using the same hole in the support that the rubber bumper was in. I used a piece of rubber around the post cut to hold...
This is what I am currently using. [IMG]
No prob! And gave me an idea in the process! :thumbsup:
Does this help? Tape measure is against the firewall. Not sure if you would cut the outer part flush, or what. If so, right at 1" good idea,...
Mine is not "just a bearing". It has lips and ridges, etc. Minor OD (where my fingers are) is 2.132", and Major OD off the lip is 2.215" The...
There is the longer DD shaft that goes to the rack, two u-joints. That is it.
FWIW... My modification shaft is only .75" around from round edge to round edge. My bearing inner diameter is .75". Bearing is has CSA204-12...
Dave, mine has no instructions. How do I install this?
Makes me miss taking a trip down the track...:cry:
I have a dodge ram, and once had to change the fan out front on the condenser (I think that is the name of it, looks like a radiator). I had to...
$50 for freon isn't going to cover parts and labor to fix whatever they broke that caused the leak. I would assume something is broken, not just...
Here is what the rod and custom setup looks like. That bearing fits snugly inside the steering shaft tube, and the rod is welded to the steering...
Separate names with a comma.
